Electronic Components Datasheet Search |
|
BR25S320FVT-W Datasheet(PDF) 7 Page - Rohm |
|
BR25S320FVT-W Datasheet(HTML) 7 Page - Rohm |
7 / 19 page Technical Note 7/18 BR25S□□□ Series www.rohm.com 2010.12 - Rev.B © 2010 ROHM Co., Ltd. All rights reserved. ●Features ○Status registers This IC has status register. The status register expresses the following parameters of 8 bits. BP0 and BP1 can be set by write status register command. These 2 bits are memorized into the EEPROM, therefore are valid even when power source is turned off. Rewrite characteristics and data hold time are same as characteristics of the EEPROM. WEN can be set by write enable command and write disable command. WEN becomes write disable status when power source is turned off. R/B is for write confirmation, therefore cannot be set externally. The value of status register can be read by read status register command. 1. Contexture of status register Product number bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 BR25S320-W WPEN 0 0 0 BP1 BP0 WEN R ― /B BR25S640-W BR25S128-W BR25S256-W bit Memory location Function WPEN EEPROM WPB pin enable / disable designation bit WPEN=0=invalid WPEN=1=valid BP1 BP0 EEPROM EEPROM write disable block designation bit WEN registers Write and write status register write enable / disable status confirmation bit WEN=0=prohibited WEN=1=permitted R ― /B registers Write cycle status (READY / BUSY) status confirmation bit R ― /B=0=READY R ― /B=1=BUSY 2. Write disable block setting BP1 BP0 Write disable block BR25S320-W BR25S640-W BR25S128-W BR25S256-W 0 0 None None None None 0 1 C00h-FFFh 1800h-1FFFh 3000h-3FFFh 6000h-7FFFh 1 0 800h-FFFh 1000h-1FFFh 2000h-3FFFh 4000h-7FFFh 1 1 000h-FFFh 0000h-1FFFh 0000h-3FFFh 0000h-7FFFh ○WPB pin By setting WPB=LOW, write command is prohibited. And the write command to be disabled at this moment is WRSR. However, when write cycle is in execution, no interruption can be made. Product number WRSR WRITE BR25S320-W Prohibition possible but WPEN bit “1” Prohibition impossible BR25S640-W BR25S128-W BR25S256-W ○HOLDB pin By HOLDB pin, data transfer can be interrupted. When SCK=”0”, by making HOLDB from “1” into”0”, data transfer to EEPROM is interrupted. When SCK = “0”, by making HOLDB from “0” into “1”, data transfer is restarted. |
Similar Part No. - BR25S320FVT-W |
|
Similar Description - BR25S320FVT-W |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |