Plastic package.

Glass passivated junction.

30,000W Peak Pulse Power capability on 10/1000µs waveform.

Excellent clamping capability.

Repetition rate (duty cycle): 0.05%.

Low incremental surge resistance.

Fast response time: typically less than 1.0ps from 0 volt to BV.

High temperature soldering guaranteed: 265°C/10 seconds/.375",

(9.5mm) lead length, 5lbs., (2.3kg) tension.

Case: Molded plastic over glass passivated junction.

Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026.

Polarity: Color band denotes cathode except Bipolar.

Mounting Position: Any.

Weight: 0.07 ounce, 2.3 grams.

For Bidirectional use C or CA suffix for type 30KPA30 through type 30KPA288 (e.g. 30KPA30C, 30KPA288CA);

Electrical characteristics apply in both directions.

UL E223045

Ratings at 25°C ambient temperature unless otherwise specified.

P600

Notes:

1. Non-repetitive current pulse, per Fig.

per Fig. 2.

2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum.

°C

RATING

SYMBOL

VALUE

UNIT

Peak Pulse Power Dissipation on 10/1000 s waveform.

(Note 1, Fig. 1)

Minimum

Watts

Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3)

See Table

Amps

, Lead length .375”

(9.5mm). (Fig. 5)

8.0

Watts

Peak Forward Surge Current, 8.3ms Single Half Sine-Wave

Superimposed on Rated Load. (JEDEC Method) (Note 2, Fig. 6)

400

Amps

Operating junction and Storage Temperature Range.

-55 to +175

°C

°C

30,000

Transient Voltage Suppressors

MERITEK

All specifications are subject to change without notice.

1

Rev 7