92706 / 91004 JO IM No.7230-1/7

LV8011V

Overview

LV8011V is a 1ch forward/reverse motor driver IC using D-MOS FET for output stage. As MOS circuit is used, it

supports the PWM input. Its features are that the on resistance (0.37

Ω typ) and current dissipation are low.

It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the

motors that need high-current (maximum peak current : 5A).

Absolute Maximum Ratings at Ta = 25

°C, SGND = PGND = 0V

Parameter

Symbol

Conditions

Ratings

Unit

Maximum Power Source Voltage

(For load)

VM max

-0.5 to 7.5

V

Maximum Power Source Voltage

(For control)

VCC max

-0.5 to 6.0

V

IO max

DC

1.0

A

IO peak1

t

≤100ms, f = 2Hz

3.0

A

Maximum Output Current

IO peak2

t

≤10ms, f = 2Hz

5.0

A

Input Voltage

VIN max

-0.5 to VCC+0.5

V

Operating Temperature

Topr

-20 to +75

°C

Storage Temperature

Tstg

-55 to 150

°C

Allowable Power Dissipation

Pd

*Specified substrate

800

mW

* When mounting the glass epoxy substrate 30mm

×50mm×1.6mm.

Allowable Operating Range at SGND = PGND = 0V

Parameter

Symbol

Conditions

Ratings

Unit

Power Source Voltage (For load)

VM

2.0 to 6.5

V

Power Source Voltage (For control)

VCC

4.5 to 5.5

V

Input Signal Voltage

VIN

0 to VCC

V

Input Signal Frequency

f max

duty = 50%

100

kHz

Charge-Pump Capacitor

C1, C2, C3

0.001 to 0.1

µF

Ordering number : ENN*7230

Bi-CMOS IC

Forward/Reverse Motor Driver

Any and all SANYO Semiconductor products described or contained herein do not have specifications

that can handle applications that require extremely high levels of reliability, such as life-support systems,

aircraft's control systems, or other applications whose failure can be reasonably expected to result in

serious physical and/or material damage. Consult with your SANYO Semiconductor representative

nearest you before using any SANYO Semiconductor products described or contained herein in such

applications.

SANYO Semiconductor assumes no responsibility for equipment failures that result from using products

at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition

ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor

products described or contained herein.