Data brief

For further information contact your local STMicroelectronics sales office.

September 2010

Doc ID 18012 Rev 1

1/6

6

STEVAL-IFV002V1

STEVAL-IFV002V1 IPCAM extension board

based on the STM32F107VC

Features

STM32, includes the following:

– STEVAL-IFV002V1 board

– CAMERA pepper board

– object files are available for the firmware

Description

The STEVAL-IFV002V1 demonstration board

implements a camera extension board which is

used to interface a CAMERA board to the

STM3210C-EVAL demonstration board.

This extension board is built around

STMicroelectronic's ARM with a Cortex-M3 core-

based STM32F107VC microcontroller in a 100

pin package.

This extension board consists of a camera board

connector, two female headers which fit on CN8

and CN9 of the EVAL demonstration board, and a

power supply unit required for the camera unit.

The application works on the Web server

implemented on the STM3210C-EVAL

demonstration board.

The camera interface library is implemented on

STM32 to capture the image from the camera.

The board is interfaced with a CAMERA pepper

board.

The camera sensor is mounted on this pepper

board. To capture the image, commands are

provided through an I2C interface. An Ethernet

library is ported on the STM3210C-EVAL

demonstration board to transfer the image

through Ethernet.

DHCP client is also supported on the board to

assign the IP address automatically.

STEVAL-IFV002V1

www.st.com