Si4455-2WayLink-DEMO

8

Rev. 0.1

2.4.1.3. TX State

In TX state the node sends packets to the receiver repeatedly with half second timeout including the node address.

After sending the packet, transmitter waits for ACK packet until the half second transmit timeout. The transmitter

recalculates its PER after receiving the ACK packet or timeout occurred.

State display:

Options:

2.4.1.4. Configuration Menu

The user can change demo parameters in the configuration menu.

State display:

Options:

2.4.1.5. Address Configuration Menu

The user can set new node address in this menu state.

State Display:

Set the Configuration:

representation).

(see Figure 4).

Figure 4. Address Configuration Example (10)