Si4010-Keyfob-DEMO

6

Rev 1.1

5. Siicon Labs IDE Run

Download the SiLabs IDE (Integrated Dvelopment Environment) from

http://www.silabs.com/products/mcu/Pages/SiliconLaboratoriesIDE.aspx and install it on your computer. To run the

Silicon Labs IDE, open the *.wsp project file.

6. Keil Toolchain Integration

The project files in examples assume that the Keil toolchain is installed to: C:\Keil directory. The location of the Keil

toolchain can be easily changed in the Silabs IDE in the Project—Tool Chain Integration menu. An evaluation

version of the Keil toolchain can be downloaded from the Keil web site, http://www.keil.com/. This free version has

2 kB code limitation and starts the code at 0x0800 address. The Keil free evaluation version can be unlocked to

become a 4k version with no code placement limitation by following the directions given in application note “AN104:

Integrating Keil 8051 Tools into the Silicon Labs IDE”, which covers Keil toolchain integration and license

management. Unlock code can be found on the WDS CDROM in the root folder in the Keil_license_number.txt file.

Contact your Silicon Laboratories sales representative or distributor for application assistance.

For complete development platform containing debug adapter and development boards, see Silicon Laboratories

key fob development kit (P/N 4010-DKKF_434 or 4010-DKKF_868).