 |
 |
|
| 4053L-S16-R |
|
|||||||||||||||
 UTC
|
| |||||||||||||||
|
3 page 
4053 CMOS IC UNISONICTECHNOLOGIESCO.,LTD 3 of 7 www.unisonic.com.tw QW-R502-036.D ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage (Referenced to VEE, VSS≧VEE) VDD -0.5 ~ +18 V Input or Output Voltage (DC or Transient) (Referenced to VSS for Control Inputs and VEE for Switch I/O) VIN, VOUT -0.5 ~ VDD +0.5 V Input Current (DC or Transient), per Control Pin IIN ±10 mA Switch Through Current ISW ±25 mA Power Dissipation PD 500 mW Derating above 65°C 7 mW/°C Junction Temperature TJ 125 °C Operating Temperature TOPR -40 ~ +125 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT SUPPLY REQUIREMENTS (Voltages Referenced to VEE) Power Supply Voltage Range VDD VDD – 3≧VSS≧VEE 3 18 V Quiescent Current per Package VDD=5V IQ Control Inputs: VIN = VSS or VDD Switch I/O: VEE ≦VI/O ≦VDD, ΔVSW≦500mV (Note 2) 0.005 5 µA VDD=10V 0.010 10 µA VDD=15V 0.015 20 µA Total Supply Current (Dynamic Plus Quiescent, Per Package) VDD=5V ID(AV) TA=25°C only (The channel component, (VIN-VOUT)/RON, is excluded) (0.07 µA/kHz) f + IQ µA VDD=10V (0.20 µA/kHz) f + IQ µA VDD=15V (0.36 µA/kHz) f + IQ µA SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE) Recommended Peak–to–Peak Voltage Into or Out of the Switch VI/O Channel On or Off 0 VDD VPP Recommended Static or Dynamic Voltage Across the Switch (Note2) ΔVSW Channel On 0 600 mV Output Offset Voltage VO(OFF) VIN = 0V, No Load 10 µV ON Resistance VDD=5V RON ΔVSW≦500mV VIN = VIL or VIH (Control), and VIN = 0 to VDD (Switch) 250 1050 Ω VDD=10V 120 500 Ω VDD=15V 80 280 Ω Δ ON Resistance Between Any Two Channels in the Same Package VDD=5V ΔRON 25 70 Ω VDD=10V 10 50 Ω VDD=15V 10 45 Ω Off–Channel Leakage Current IOFF VIN = VIL or VIH (Control) Channel to Channel or Any One Channel, VDD=15V ±0.05 ±100 nA Capacitance, Switch I/O CI/O Inhibit = VDD 10 pF Capacitance, Common O/I CO/I Inhibit = VDD 17 pF Capacitance, Feedthrough (Channel Off) CI/O Pins Not Adjacent 0.15 pF Pins Adjacent 0.47 Pf CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS) Low Level Input Voltage VDD=5V VIL RON= per spec, IOFF = per spec 2.25 1.5 V VDD=10V 4.50 3.0 V VDD=15V 6.75 4.0 V High Level Input Voltage VDD=5V VIH RON= per spec, IOFF = per spec 3.5 2.75 V VDD=10V 7.0 5.50 V VDD=15V 11 8.25 V Input Leakage Current ILEAK VIN= 0 or VDD, VDD=15V ±0.00001 ±0.1 µA Input Capacitance CIN 5.0 7.5 pF |
