 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
MAX11330 Datasheet(PDF) 1 Page - Maxim Integrated Products |
|
||||||||||||||||||||||||||||||
MAX11330 Datasheet(HTML) 1 Page - Maxim Integrated Products |
|
|
1 / 37 page  MAX11329–MAX11332 3Msps, 12-/10-Bit, 8-/16-Channel ADCs with Post-Mux External Signal Conditioning Access ����������������������������������������������������������������� Maxim Integrated Products 1 19-6262; Rev 0; 3/12 Ordering Information appears at end of data sheet. For related parts and recommended products to use with this part, refer to www.maxim-ic.com/MAX11329-MAX11332.related. General Description The MAX11329–MAX11332 are 12-/10-bit with external reference and 500kHz, full-linear-bandwidth, high-speed, low-power, serial-output successive approximation reg- ister (SAR) analog-to-digital converters (ADCs). The MAX11329–MAX11332 provide external access to the output of the integrated mux and ADC input, to simplify the signal conditional circuitry. The MAX11329–MAX11332 include both internal and external clock modes. These devices feature scan mode in both internal and external clock modes. The internal clock mode features internal averaging to increase SNR. The external clock mode fea- tures the SampleSetK technology, a user-programmable analog input channel sequencer. The SampleSet approach provides greater sequencing flexibility for multichannel applications while alleviating significant microcontroller or DSP (controlling unit) communication overhead. External pins provide access to the output of the multiplexer and ADC inputs to simplify multichannel sig- nal conditioning. The internal clock mode features an inte- grated FIFO allowing data to be sampled at high speeds and then held for readout at any time or at a lower clock rate. Internal averaging is also supported in internal clock mode improving SNR for noisy input signals. The devices feature analog input channels that can be configured to be single-ended inputs, fully differential pairs, or pseudo- differential inputs with respect to one common input. The MAX11329–MAX11332 operate from a 2.35V to 3.6V sup- ply and consume only 15.2mW at 3Msps. The MAX11329–MAX11332 include AutoShutdownK, fast wake-up, and a high-speed 3-wire serial interface. The devices feature full power-down mode for optimal power management. The 48MHz, 3-wire serial interface directly connects to SPI, QSPIK, and MICROWIREM devices without external logic. Excellent dynamic performance, low voltage, low power, ease of use, and small package size make these convert- ers ideal for portable battery-powered data-acquisition applications, and for other applications that demand low power consumption and small space. The MAX11329–MAX11332 are available in 32-pin, 5mm x 5mm, TQFN packages and operate over the -40NC to +125NC temperature range. Benefits and Features S Scan Modes, Internal Averaging, and Internal Clock S 16-Entry First-In/First-Out (FIFO) S SampleSet: User-Defined Channel Sequence with Maximum Length of 256 S Input Pins Any Combination of Single-Ended, Differential and Pseudo-Differential Pairs Allowed S Analog Multiplexer with True Differential Track/Hold 16-/8-Channel Single-Ended 8-/4-Channel Fully-Differential Pairs 15-/8-Channel Pseudo-Differential Relative to a Common Input S Externally Accessible Multiplex Output and ADC Input S Two Software-Selectable Bipolar Input Ranges Q VREF+/2, QVREF+ S Flexible Input Configuration Across All Channels S High Accuracy Q 1 LSB INL, Q1 LSB DNL, No Missing Codes S 70dB SINAD Guaranteed at 100kHz Input Frequency S 1.5V to 3.6V Digital I/O Supply Voltage S 2.35V to 3.6V Supply Voltage S Extended Battery Life for Portable Applications 15.2mW at 3Msps with 3V Supplies 2µA Full-Shutdown Current S External Differential Reference (1V to VDD) S 48MHz, 3-Wire SPI-/QSPI-/MICROWIRE-/DSP- Compatible Serial Interface S Wide -40NC to +125NC Operation S Space-Saving, 32-Pin, 5mm x 5mm TQFN Packages S 3Msps Conversion Rate, No Pipeline Delay Applications High-Speed Data Acquisition Systems High-Speed Closed-Loop Systems Industrial Control Systems Medical Instrumentation Battery-Powered Instruments Portable Systems SampleSet and AutoShutdown are trademarks of Maxim Integrated Products, Inc. QSPI is a trademark of Motorola, Inc. MICROWIRE is a registered trademark of National Semiconductor Corporation. EVALUATION KIT AVAILABLE For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. |
Similar Part No. - MAX11330 |
|
Similar Description - MAX11330 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
