83006 / 52506HKIM No.A0119-1/20

Ver.1.00

LC863864B, LC863856B

LC863848B, LC863840B

LC863832B, LC863828B

LC863824B, LC863820B

LC863816B

Overview

The LC863864B/56B/48B/40B/32B/28B/24B/20B/16B are 8-bit single chip microcontrollers with the following on-chip

functional blocks :

• CPU : Operable at a minimum bus cycle time of 0.424µs

• On-chip ROM capacity

Program ROM : 64K/56K/48K/40K/32K/28K/24K/20K/16K-bytes

CGROM

: 16K-bytes

• On-chip RAM capacity : 768-bytes

• OSD RAM : 352 × 9-bits

• Closed-Caption TV controller and the on-screen display controller

• Closed-Caption data slicer

• Four channels × 8-bit AD Converter

• Three channels × 7-bit PWM

• Two 16-bit timer/counter, 14-bit base timer

• 8-bit synchronous serial interface circuit

• IIC-bus compliant serial interface circuit (Multi-master type)

Continued on next page.

Ordering number : ENA0119A

CMOS IC

64K/56K/48K/40K/32K/28K/24K/20K/16K-byte ROM,

CGROM16K-byte

on-chip 768-byte RAM and 352

×9-bit OSD RAM

8-bit 1-chip Microcontroller

Trademarks

IIC is a trademark of Philips Corporation.

Note : This product includes the IIC bus interface circuit. If you intend to use the IIC bus interface, please notify us of this in

advance of our receiving your program ROM code order.

Purchase of SANYO IIC components conveys a license under the Philips IIC Patents Rights to use these components in

an IIC system, provided that the system conforms to the IIC Standard Specification as defined by Philips.

Any and all SANYO Semiconductor products described or contained herein do not have specifications

that can handle applications that require extremely high levels of reliability, such as life-support systems,

aircraft's control systems, or other applications whose failure can be reasonably expected to result in

serious physical and/or material damage. Consult with your SANYO Semiconductor representative

nearest you before usingany SANYO Semiconductor products described or contained herein in such

applications.

SANYO Semiconductor assumes no responsibility for equipment failures that result from using products

at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition

ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor

products described or contained herein.