MEMS Airflow Sensor

D6F-10A, -20A, -50A

25

Test Results (typical performance)

D6F-20A

@

(5 samples, repeated 10 times each)

Installation: D6F-

@A5-000

Recommendation for right-angle, manifold mount connection;

Use M3 panhead screws for mounting, and tighten them to a maximum

torque of 0.59 N•m. Please seal INLET and OUTLET with ‘O’ rings.

Please install the product as shown below. Incorrect mounting may

cause product failure and make it impossible to obtain correct measure-

ments.

Recommended ‘O’ ring for sealing inlet and outlet orifice;

• Material: NBR70 (recommended for all applications including

medical and food processing.)

• Example part number: JASO part number: CO 0003

• Alternative manufacturers with similar DO and W dimensions may

be used

-1.0

-0.8

-0.6

-0.4

-0.2

0.0

0.2

0.4

0.6

0.8

1.0

0

2

4

6

8

10

1214161820

Flow Rate (lpm)

Inlet

Outlet

O ring

5.8

1.9 ± 0.07