FEATURES / BENEFITS

Low current draw - uses up to 90% less energy

than incandescent

Long Life - up to 100K hours

True non-polarized configurations available

No heat generated

Mounts directly into industry standard socket

Available in 6, 14, and 28 VDC

585 Series

Multi-Chip BASED LED

T1 3/4 Midget Flange

Dialight Corporation

1501 Route 34 South • Farmingdale, NJ 07727 USA

Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com

a Roxboro Group Company

MDEL585MF001_B

SPECIFICATIONS

CONSIDERATIONS

Dialight's line of based LED lamps is designed to directly

replace many popular subminiature and miniature incandescent

lamps. The benefits of LED technology over incandescent are

significant: They offer long life, are shock resistant, withstand

vibration and provide energy conservation.

Operating Voltages: 6, 14, and 28 VDC

Polarized and non-polarized available

Replaces incandescent lamp numbers: 327, 328, 330,

345, 349, 350, 376, 377, 380, 381, 382, 385, 387, and

7341.*

*

See Dialight’s Incandescent lamp/based LED

cross reference for a complete listing

Dialight reserves the right to make changes at any time

in order to supply the best product possible.

Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED.

If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses,

which will optimize the light output.

If you are unfamiliar with the polarity of the circuit, Dialight recommends using a non-polarized version.

Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.

Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.

Dialight does not recommend that based LED lamps be used in neon sockets.

Measurements are typical

Dimensions are inches [mm]