 |
 |
|
| 1N5811US |
|
|||||||||||||||
 MICROSEMI
|
| |||||||||||||||
|
3 page 
TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 Gort Road Bussiness Park, Ennis, Co. Clare, Ireland. 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: http://www.microsemi.com T4-LDS-0168 Rev. 1 (101025) Page 3 of 7 ELECTRICAL CHARACTERISTICS @ 30oC Case Temperature TYPE WORKING PEAK REVERSE VOLTAGE VRWM BREAKDOWN VOLTAGE (MIN.) @ 100 μA VBR AVERAGE RECTIFIED CURRENT IO1 @TL=75ºC (Note 1) AVERAGE RECTIFIED CURRENT IO2 @TA=55ºC Note 2 MAXIMUM FORWARD VOLTAGE @ 4A (8.3 ms pulse) VF REVERSE CURRENT (MAX) @ VRWM IR SURGE CURRENT (MAX) IFSM (NOTE 3) REVERSE RECOVERY TIME (MAX) (NOTE 4) trr VOLTS VOLTS AMPS VOLTS μA AMPS ns 25 oC 100 oC 25oC 125oC 1N5807, US 50 60 6.0 3.0 0.875 0.800 5 525 125 30 1N5809, US 100 110 6.0 3.0 0.875 0.800 5 525 125 30 1N5811, US 150 160 6.0 3.0 0.875 0.800 5 525 125 30 NOTE 1: Leaded: Rated at TL = 75ºC at 3/8 inch lead length. Derate at 60 mA/ºC for TL above 75ºC. Surface mount: Rated at TEC = 75°C. Derate at 60 mA/ºC for TEC above 75ºC. NOTE 2: Derate linearly at 25 mA/ºC above TA = 55ºC. This rating is typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(max) does not exceed 175ºC NOTE 3: TA = 25 oC @ I O = 3.0 A and VRWM for ten 8.3 ms surges at 1 minute intervals NOTE 4: IF = 1.0 A, IRM = 1.0 A, IR(REC) = 0.10 A and di/dt = 100 A/µs min SYMBOLS & DEFINITIONS Symbol Definition VBR Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. VRWM Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range. VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. IR Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. C Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage trr Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified recovery decay point after a peak reverse current is reached. |
|
