1

Transformer, 4:1 transmission line

5 to 1000 MHz

Rev. V3

MABACT0066

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

•

Surface mount

•

4:1 Impedance ratio

•

Excellent amplitude and phase balance

•

Can be used in both 50Ω and 75Ω systems

•

260°C reflow compatible

•

RoHS* compliant, Pb free

•

Available on tape and reel.

Description

M/A-Com Technology Solutions MABACT0066 is a

4:1 RF flux coupled step up transformer in a low

cost, surface mount package. Ideally suited for

broadband CATV Broadband applications.

Schematic

Pin no.

Function

1

Secondary dot (Output 1)

2

Centre tap (Ground)

3

Secondary (Output 2)

4

Primary (Input)

5

Primary dot (Ground)

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Pin configuration

Component Dimensions

Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010,

unless otherwise stated