Electronic Components Datasheet Search |
|
VCE1-A2A-25M00 Datasheet(PDF) 2 Page - Vectron International, Inc |
|
VCE1-A2A-25M00 Datasheet(HTML) 2 Page - Vectron International, Inc |
2 / 5 page Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com Performance Characteristics Table 1. Electrical Performance, 5V option Parameter Symbol Min Typical Maximum Units Frequency fO 1.000 66.667 MHz Operating Supply Voltage 1 VDD 4.5 5.0 5.5 V Absolute Maximum Supply Voltage -0.7 7.0 V Supply Current, Output Enabled IDD 40 mA Output Logic Levels Output Logic High 2 Output Logic Low 2 VOH VOL 0.9*VDD 0.1*VDD V V Output Rise/Fall Time 2 tR/tF 8 ns Duty Cycle 3 (ordering option) SYM 40/60 or 45/55 % Operating Temperature (ordering option) TOP 0/70 or -40/85 °C Storage Temperature TSTOR -55 125 °C Stability 4 (ordering option) ∆F/T ±50, ±100 ppm Output Enable/Disable 5 Output Enabled Output Disabled E/D 4.0 0.8 V Start-up time TSU 10 ms Table 2. Electrical Performance, 3.3V option Parameter Symbol Min Typical Maximum Units Frequency fO 1.000 66.667 MHz Operating Supply Voltage 1 VDD 2.97 3.3 3.63 V Absolute Maximum Operating Voltage -0.5 5.0 V Supply Current, Output Enabled IDD 40 mA Output Logic Levels Output Logic High 2 Output Logic Low 2 VOH VOL 0.9*VDD 0.1*VDD V V Output Rise/Fall Time 2 tR/tF 8 ns Duty Cycle 3 (ordering option) SYM 40/60 or 45/55 % Operating Temperature (ordering option) TOP 0/70 or –40/85 °C Storage Temperature TSTOR -55 125 °C Stability 4 (ordering option) ∆F/T ±50, ±100 ppm Output Enable/Disable 5 Output Enabled Output Disabled E/D 2.0 0.5 V Start-up time TSU 10 ms 1. A 0.01uF and a 0.1uF capacitor should be located as close to the supply as possible (to ground) is recommended. 2. Figure 3 defines these parameters. Figure 4 illustrates the operating conditions under which these parameters are tested and specified. For Fo>90MHz, rise and fall time is measured 20 to 80%. 3. Symmetry is measured defined as On Time/Period. 4. Includes calibration tolerance, operating temperature, supply voltage variations, aging and shock and vibration. 5. Output will be enabled if enable/disable is left open. Figure 3. Output Waveform Figure 4. Typical Output Test Conditions (25 ±5°C) + - + - IC VC 3 2 .1µF .01 µF 15pF 4 1 IDD VDD V OH 50% V OL tF tR Period On Time |
Similar Part No. - VCE1-A2A-25M00 |
|
Similar Description - VCE1-A2A-25M00 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |