Full-Featured E Series Multifunction DAQ

12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog Inputs

NI MITE – ASIC designed to optimize data transfer for multiple

simultaneous operations using bus mastering with three scatter-

gather DMA channels for maximum performance of concurrent

I/O operations.

NI PGIA – Measurement and instrument class amplifier that

guarantees settling times at all gains. Typical commercial off-the-

shelf amplifier components do not meet the settling time

requirements for high-gain measurement applications.

PFI Lines – Eight programmable function input (PFI) lines that

can be used for software-controlled routing of interboard and

intraboard digital and timing signals.

RTSI or PXI Trigger Bus – Used to share timing and control signals

between devices and synchronize operations.

RSE Mode – In addition to differential and nonreferenced single-

ended modes, NI full-featured E Series devices offer referenced

single-ended (RSE) mode for use with floating signal sources in

applications with channel counts higher than eight.

Onboard Temperature Sensor – Included for monitoring the

operating temperature of the device to ensure that it is operating

within the specified range.

Analog and Digital Triggering – Only full-featured E Series devices

provide the ability to set a trigger based on the level of an analog

signal, in addition to the ability to trigger off an edge of a

digital signal.

More Input Ranges – Up to 15 input ranges for optimal resolution,

even for signals smaller than 50 mV.

High-Performance, Easy-to-Use Driver Software

NI-DAQ is the robust driver software that makes it easy to access the

functionality of your data acquisition hardware, whether you are a

beginning or advanced user. Helpful features include:

Automatic Code Generation – DAQ Assistant is an interactive guide

that steps you through configuring, testing, and programming

measurement tasks, and generating the necessary code automatically

for use in LabVIEW, LabWindows/CVI, or Measurement Studio.

Cleaner Code Development – Basic and advanced software functions

have been combined into one easy-to-use yet powerful set to help

you build cleaner code and move from basic to advanced

applications without replacing functions.

High-Performance Driver Engine – Software-timed single-point

input (typically used in control loops) with NI-DAQ achieves

rates of up to 50 kHz. NI-DAQ also delivers maximum I/O

system throughput with a multithreaded driver.

Test Panels – With NI-DAQ, you can test all of your device

functionality before you begin development.

Scaled Channels – Easily scale your voltage data into the proper

engineering units using the NI-DAQ Measurement Ready virtual

channels by choosing from a list of common sensors and signals or

creating your own custom scale.

LabVIEW Integration – All NI-DAQ functions use the waveform data

type, which carries acquired data and timing information directly

into more than 400 LabVIEW built-in analysis routines for display of

results in engineering units on a graph.

Worldwide Support and Services

NI provides you with a wealth of resources to help you get your

application up and running more quickly, including:

Technical Support – Purchase of NI hardware or software gives you

access to application engineers all over the world as well as Web

resources with more than 3,000 measurement examples and more

NI Factory Installation Services (FIS) – Software and hardware

installed in PXI and PXI/SCXI systems, tested and ready to

Calibration – Includes NIST-traceable basic calibration certificates,

services for ANSI/NCSL-Z540 and periodic calibration –

ni.com/calibration

Extended Warranty – Meet project life-cycle requirements

and maintain optimal performance in a cost-effective way –

ni.com/services

Professional Services – Feasibility, consulting, and integration

For more information on NI services and support,

For information on device support in