General Description

The MAX6335/MAX6336/MAX6337 microprocessor (µP)

supervisory circuits monitor the power supplies in 1.8V

to 3.3V µP and digital systems. They increase circuit reli-

ability and reduce cost by eliminating external compo-

nents and adjustments. They also feature a debounced

manual-reset input.

These devices perform a single function: they assert a

below a preset threshold or whenever manual reset is

asserted. Reset remains asserted for a preset timeout

after manual reset is deasserted. The only difference

among the three devices is their output. The MAX6336

(push/pull) and MAX6337 (open-drain) have an active-

low RESET output, while the MAX6335 (push/pull) has

an active-high RESET output. The MAX6335/MAX6336

to 0.7V. The MAX6337 is guaranteed to be in the cor-

The reset comparator in these ICs is designed to ignore

trimmable between 1.6V and 2.5V, in approximately

100mV increments. There are 15 standard versions

available (2500 piece minimum-order quantity); contact

the factory for availability of nonstandard versions

(10,000 piece minimum-order quantity). For space-criti-

cal applications, the MAX6335/MAX6336/MAX6337

come packaged in a 4-pin SOT143.

Applications

Pentium II™ Computers

Computers

Controllers

Intelligent Instruments

Critical µP/µC Power Monitoring

Portable/Battery-Powered Equipment

Automotive

Features

♦ Ultra-Low 0.7V Operating Supply Voltage

♦ Low 3.3µA Supply Current

♦ Precision Monitoring of 1.8V and 2.5V Power-

Supply Voltages

♦ Reset Thresholds Available from 1.6V to 2.5V,

in Approximately 100mV Increments

♦ Debounced Manual Reset

♦ Fully Specified over Temperature

♦ Three Power-On Reset Pulse Widths Available

(1ms min, 20ms min, 100ms min)

♦ Low Cost

♦ Three Available Output Structures: Push/Pull

RESET, Push/Pull RESET, Open-Drain RESET

(MAX6335/MAX6336)

♦ Power-Supply Transient Immunity

♦ No External Components

♦ 4-Pin SOT143 Package

♦ Pin Compatible with MAX811/MAX812 and

MAX6314/MAX6315

4-Pin, Ultra-Low-Voltage, Low-Power

µP Reset Circuits with Manual Reset

________________________________________________________________ Maxim Integrated Products

1

19-1412; Rev 2; 12/05

PART*

MAX6335US__D_-T

MAX6336US__D_-T

MAX6337US__D_-T

-40°C to +125°C

-40°C to +125°C

-40°C to +125°C

TEMP. RANGE

PIN-PACKAGE

4 SOT143

4 SOT143

4 SOT143

Ordering Information

olds from 1.6V to 2.5V, in approximately 0.1V increments.

Choose the desired reset threshold suffix from Table 1 and

insert it in the blanks following “US” in the part number.

Factory-programmed reset timeout periods are also available.

Insert the number corresponding to the desired nominal reset

timeout period (1 = 1ms min, 2 = 20ms min, 3 = 100ms min) in

the blank following “D” in the part number. There are 15 stan-

dard versions with a required order increment of 2500 pieces.

Sample stock is generally held on the standard versions only

(see Selector Guide). Contact the factory for availability of non-

standard versions (required order increment is 10,000 pieces).

All devices available in tape-and-reel only.

Devices are available in both leaded and lead-free packaging.

Specify lead-free by replacing “-T” with “+T” when ordering.

Typical Operating Circuit and Pin Configuration appear

at end of data sheet.

Selector Guide appears at end of data sheet.

Pentium II is a trademark of Intel Corp.

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.