UNISONIC TECHNOLOGIES CO., LTD

UR5596

CMOS IC

www.unisonic.com.tw

1 of 12

Copyright © 2008 Unisonic Technologies Co., Ltd

QW-R502-045,C

DDR TERMINATION

REGULATOR

DESCRIPTION

The UTC UR5596 is a linear bus termination regulator and

designed to meet JEDEC SSTL-2(Stub-Series Terminated Logic)

specifications for termination of DDR-SDRAM. It also can be

used in SSTL-3 or HSTL (High-Speed Transceiver Logic)

scheme. The device contains a high-speed OP AMP to provide

excellent response to the load transients, and can deliver 1.5A

continuous current and transient peaks up to 3A in the application

as required for DDR-SDRAM termination.

chipset and DIMMs. Besides, an active low shutdown (SHDN) pin

provides Suspend To RAM (STR) functionality. When SHDN is

can be obtained in this mode through lower quiescent current.

output stage has been designed to maintain excellent load

regulation while preventing shoot through. The UTC UR5596 also

incorporates two distinct power rails that separates the analog

circuitry from the power output stage. This allows a split rail

approach to be utilized to decrease internal power dissipation and

permits UTC UR5596 to provide a termination solution for DDRII

SDRAM.

FEATURES

* Source and sink current

* Low output voltage offset

* No external resistors required

* Linear topology

* Suspend To Ram (STR) functionality

* Low external component count

* Thermal shutdown protection

*Pb-free plating product number: UR5596L

ORDERING INFORMATION

Ordering Number

Normal

Lead Free Plating

Package

Packing

UR5596-S08-R

UR5596L-S08-R

SOP-8

Tape Reel

UR5596-S08-T

UR5596L-S08-T

SOP-8

Tube

UR5596-SH2-R

UR5596L-SH2-R

HSOP-8

Tape Reel

UR5596-SH2-T

UR5596L-SH2-T

HSOP-8

Tube

UR5596L-S08-R

(1) Packing Type

(2) Package Type

(3) Lead Plating

(1) R: Tape Reel, T: Tube

(2) S08: SOP-8

(3) L: Lead Free Plating, Blank: Pb/Sn