 |
 |
|
| R5F64189DFD |
|
|||||||||||||||||
 RENESAS
|
| |||||||||||||||||
|
21 page 
REJ03B0255-0110 Rev.1.10 Page 21 of 123 Jun 23, 2010 R32C/118 Group 1. Overview Notes: 1. Port P9_1 in the 100-pin package is an input-only port. 2. Ports P9_0, P9_2, and P11 to P15 are available in the 144-pin package only. Table 1.16 Pin Definitions and Functions (3/4) I/O port (1, 2) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_4, P12_0 to P12_7, P13_0 to P13_7, P14_3 to P14_6, P15_0 to P15_7 I/O I/O ports in CMOS. Each port can be programmed to input or output under the control of the direction register. Some ports are 5 V tolerant inputs. Pull-up resistors and N-channel open drain setting can be enabled on some ports. Refer to Table 1.18 “Pin Specifications” for details Input port (2) P9_1 (for 100-pin package) P14_1 (for 144- pin package) I Input port in CMOS Pull-up resistor is selectable. Refer to Table 1.18 “Pin Specifications” for details Timer A TA0OUT to TA4OUT I/O Timers A0 to A4 input/output TA0IN to TA4IN I Timers A0 to A4 input Timer B TB0IN to TB5IN I Timers B0 to B5 input Three-phase motor control timer output U, U,V,V,W,W O Three-phase motor control timer output Serial interface CTS0 to CTS8 I Handshake input RTS0 to RTS8 O Handshake output CLK0 to CLK8 I/O Transmit/receive clock input/output RXD0 to RXD8 I Serial data input TXD0 to TXD8 O Serial data output I2C bus (simplified) SDA0 to SDA6 I/O Serial data input/output SCL0 to SCL6 I/O Transmit/receive clock input/output Serial interface special functions STXD0 to STXD6 O Serial data output in slave mode SRXD0 to SRXD6 I Serial data input in slave mode SS0 to SS6 I Input to control serial interface special functions |
