Electronic Components Datasheet Search |
|
TUSB1106RGTR Datasheet(PDF) 11 Page - Texas Instruments |
|
|
TUSB1106RGTR Datasheet(HTML) 11 Page - Texas Instruments |
11 / 33 page www.ti.com Dynamic Electrical Characteristics – Analog I/O Pins (D+, D–) (1) (2) Dynamic Electrical Characteristics – Analog I/O Pins (D+, D–) (1) (2) Dynamic Electrical Characteristics – Analog I/O Pins (D+, D–) (1) (2) TUSB1105, TUSB1106 ADVANCED UNIVERSAL SERIAL BUS TRANSCEIVERS SCAS818D – MAY 2006 – REVISED FEBRUARY 2008 Driver Characteristics, Full-Speed Mode over recommended ranges of operating free-air temperature and supply voltage, VCC = 4 V to 5.5 V or Vreg(3.3) = 3 V to 3.6 V, VCC(I/O) = 1.65 V to 3.6 V, VGND = 0 V, see Table 10 for valid voltage level combinations, TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT CL = 50 pF to 125 pF, tFR Rise time 4 20 ns 10% to 90% of |VOH – VOL| (see Figure 1) CL = 50 pF to 125 pF, tFF Fall time 4 20 ns 90% to 10% of |VOH – VOL| (see Figure 1) Differential rise/fall time matching FRFM Excluding the first transition from idle state 90 111.1 % (tFR/tFF) VCRS Output signal crossover voltage Excluding the first transition from idle state (see Figure 10) 1.3 2 V (1) Test circuit, see Figure 13 (2) Driver timing in low-speed mode is not specified. Low-speed delay timings are dominated by the slow rise/fall times tLR and tLF. Driver Characteristics, Low-Speed Mode over recommended ranges of operating free-air temperature and supply voltage, VCC = 4 V to 5.5 V or Vreg(3.3) = 3 V to 3.6 V, VCC(I/O) = 1.65 V to 3.6 V, VGND = 0 V, see Table 10 for valid voltage level combinations, TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT CL = 200 pF to 600 pF, tLR Rise time 75 300 ns 10% to 90% of |VOH – VOL| (see Figure 1) CL = 200 pF to 600 pF, tLF Fall time 75 300 ns 90% to 10% of |VOH – VOL| (see Figure 1) Differential rise/fall time matching LRFM Excluding the first transition from idle state 80 125 % (tLR/tLF) VCRS Output signal crossover voltage Excluding the first transition from idle state (see Figure 10) 1.3 2 V (1) Test circuit, see Figure 13 (2) Driver timing in low-speed mode is not specified. Low-speed delay timings are dominated by the slow rise/fall times tLR and tLF. Driver Timing, Full-Speed Mode over recommended ranges of operating free-air temperature and supply voltage, VCC = 4 V to 5.5 V or Vreg(3.3) = 3 V to 3.6 V, VCC(I/O) = 1.65 V to 3.6 V, VGND = 0 V, see Table 10 for valid voltage level combinations, TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT tPLH(drv) LOW to HIGH (see Figure 4) 18 Driver propagation delay ns (VO/VPO, FSE0/VMO to D+, D–) tPHL(drv) HIGH to LOW (see Figure 4) 18 tPHZ HIGH to OFF (see Figure 2) 15 Driver disable delay (OE to D+, D–) ns tPLZ LOW to OFF (see Figure 2) 15 tPZH OFF to HIGH (see Figure 2) 15 Driver enable delay (OE to D+, D–) ns tPZL OFF to LOW (see Figure 2) 15 (1) Test circuit, see Figure 13 (2) Driver timing in low-speed mode is not specified. Low-speed delay timings are dominated by the slow rise/fall times tLR and tLF. Copyright © 2006–2008, Texas Instruments Incorporated Submit Documentation Feedback 11 Product Folder Link(s): TUSB1105 TUSB1106 |
Similar Part No. - TUSB1106RGTR |
|
Similar Description - TUSB1106RGTR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |