214

www.recom-international.com

April-2005

POWERLINE

DC/DC-Converter

Vibration

10-55Hz, 2G, 30 Min. along X, Y and Z

Relative Humidity

5% to 95% RH

Case Material

Nickel-Coated copper

Base Material

Non-conductive black plastic

Potting Material

Epoxy (UL94-V0)

Conducted Emissions

EN55022

Level A

Radiated Emissions

EN55022

Level A

ESD

EN61000-4-2

Perf. Criteria 2

Radiated Immunity

EN61000-4-3

Perf. Criteria 2

Fast Transient

EN61000-4-4

Perf. Criteria 2

Surge

EN61000-4-5

Perf. Criteria 2

Conducted Immunity

EN61000-4-6

Perf. Criteria 2

Weight

27g

Dimensions

50.8 x 25.4 x 10.2mm

MTBF (see note 2)

RP10-S_DEW

Series

Notes :

1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.

Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.

2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).

3. Simulated source impedance of 12uH. 12uH inductor in series with +Vin.

4. Maximum value at nominal input voltage and full load of standard type.

5. Typical value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistor load.

7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.

Positive logic ON/OFF is standard, no suffix (Ex. RP10-2405SEW)

Negative logic ON/OFF is marked with suffix-N (Ex. RP10-2405SEW/N).

8. Heat sink is optional and P/N: 7G-0020A.

9. The RP10-xxxxEW version (incl. M2 option) does not carry the UL certification.

10.M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.

11. See application notes for EMI-filtering.