UM/MC3

2

Trims

Note: Screws (No. 8

✕ 32 mm) and anchors (12 each) are included with each Trim.

Accessories

Note: For trims and accessories required for the Safety Mat system configuration, see "Installation" on page 4.

Appearance

Name

Model

Remarks

Ramp Trim with Yellow PVC

Cover (1.22 m)

UMRT4

Installed on the perimeter of the Safety Mat. Each

Trim is composed of two parts, an aluminum base

and a PVC Cover. Possible to install cables in-

side.

Ramp Trim with Yellow PVC

Cover (2.44 m)

UMRT8

Joining Trim (1.22 m)

UMJS4

The Joining Trims join the Safety Mats when two

or more Safety Mats are being combined. In addi-

tion to joining the Safety Mats, the Joining Trims

preserve the Safety Mat's sensitivity at the joints.

Joining Trim (2.44 m)

UMJS8

Aluminum Ramp Trim

(2.44 m)

UMAL

Installed on the perimeter of the Safety Mat.

Molded Outside Corner

UMOC

Installed at the outside corners of the Safety Mat

combining with Ramp Trims with Yellow PVC

Cover.

Molded Inside Corner

UMIC

Installed at the inside corners when two or more

Safety Mats combining with Ramp Trims with Yel-

low PVC Cover are being combined.

Appearance

Name

Model

Remarks

Distribution Box

(for six mats)

UMDB-6

Used to connect to two or more Safety Mats to the

single MC3 Safety Mat Controller.

Waterproof Cover

XS2Z-22

Used to protect the unused connectors of

UMDB-6.

Y Connector

UM-Y-2-1

Used to connect two Safety Mats to the single

MC3 Safety Mat Controller.

Panel-mount Connector

UMPMC

Distributes to individual lines to connect the Safe-

ty Mat to a MC3 Safety Mat Controller.

Extension Cable (3 m)

UMEC-03

This cable is used to extend a cable, or to connect

the UMPMC to the UMDB-6.

Extension Cable (5 m)

UMEC-05

Extension Cable (10 m)

UMEC-10

Extension Cable (15 m)

UMEC-15

Connector with cable

Socket on one cable end (1 m)

XS2F-D421-C80-A

Used to connect the UMDB-6 to the MC3 Safe-

ty Mat Controllers.

Connector with cable

Socket on one cable end (2 m)

XS2F-D421-D80-A

Connector with cable

Socket on one cable end (5 m)

XS2F-D421-G80-A

Connector with cable

Socket on one cable end (10 m)

XS2F-D421-J80-A