2

sMaterial

Plug

Receptacle

Insulator

Ground plate

Crimp contact

Part

Insulator

Contacts

Ground contact

Shell

Polyamide

Stainless steel

Phosphor bronze

Material

Polyamide or LCP (Note 4)

Phosphor bronze

Stainless steel

Color: Beige

Tin plated

Gold plated

Finish

Color: Beige or black (Note 5)

Gold plated

Tin plated

Tin plated or gold plated (Note 6)

UL94V-0

-------

-------

Remarks

UL94V-0

-------

-------

UL94V-0

Part

Material

Finish

Remarks

Note 4: Low profile receptacles MDF76KBW and MDF76LBRW are polyamide.

High profile receptacles MDF76TW, MDF76URW, and MDF76GW are LCP.

Note 5: Low profile receptacles MDF76KBW, MDF76TW, and MDF76GW are beige.

Reverse mounting MDF76LBRW and MDF76URW are black.

Note 6: Low profile receptacles MDF76KBW and MDF76LBRW have tin plating on the solder leads.

High profile receptacles MDF76TW, MDF76URW and MDF76GW have gold plating on the solder leads.

1. Insulation resistance

2. Withstanding voltage

3. Contact resistance

4. Durability

5. Vibration

6. Shock

7. Humidity

8. Temperature cycle

9. Resistance to

soldering heat

sSpecifications

-40ç to +85ç (Note 2)

RH 20% to 80%

-10ç to +60ç (Note 3)

RH 40% to 70% (Note 3)

Ratings

Voltage rating

Current rating

(Note 1)

Wire size

AWG 28 to 30: 1.0 A

AWG 32: 0.8 A

AWG 36: 0.5 A

Operating temperature range

Operating humidity range

Storage temperature range

Storage humidity range

200 V AC

Note 1: The current rating will differ depending on the wire size used.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting and the

temporary storage conditions of transportation, etc.

100 V DC

500 V AC / 1 minute

20 mV max., at 1 mA.

50 cycles

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

10 cycles in each of the 3 axial directions

cycles in each of the 3 axis

96 hours at 60 ±2ç, and humidity of 90% to 95%

-55ç ¡ 5 to 35ç ¡ 85ç ¡ 5 to 35ç

Times: 30 min.¡ 2 min. to 3 min. ¡ 30 min. ¡ 2min. to 3 min.

5 cycle

Reflow

: At the recommended temperature profile

Manual soldering

: 300ç for 3 seconds

100 Mø min.

No flashover or insulation breakdown

40 mø max.

Contact resistance: 80 mø max.

No deformation of components affecting performance.

No electrical discontinuity of 1 µs or longer

No damage, cracks or parts dislocation.

No electrical discontinuity of 1 µs or longer

No damage, cracks or parts dislocation.

Contact resistance: 80 mø max.,

Insulation resistance: 50 Mø min.

Contact resistance: 80 mø max.,

Insulation resistance: 50 Mø min.

No damage, cracks or parts dislocation.

No deformation of components affecting performance.

Item

Specification

Conditions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.