6

q Tools application procedures

Type

CL No.

Manual crimp tool

Contact removal pin

150-0217-7

150-0215-1

s Tools

Part No.

HR31-TC-01

HR31-SC-TP

Crimp position indicator

2

1.25

Applicable crimp contact

HR31-SC-113 or HR31-SC-111

HR31-SC-123 or HR31-SC-121

Manual crimp tool

Contact removal pin

1. Manual contact crimp tool

The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on

the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip

length is 5mm.

2. Contact removal pin

Contact removal pin provides easy method of contact removal from plug assembly.

1) Fully insert the long end of the contact removal pin into the opening in the insulator.

2) Move the pin forward, in the direction of the mating face.

This will cause the terminated contact to move in opposite direction.

3) Pull out the wire with the attached crimped contact.

Crimp position indicator

Molded-in lance

Molded-in lance

Contact removal pin

Contact removal pin

Insertion direction

Wire

Wire

Pull-out

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.