1801 Morgan Street

Rockford, Illinois 61102

800-435-2931

www.molexkits.com

Datasheet for 76650-0053

Title:

Deluxe Solderless Term Kit

.187" and .250"

(22-18), (16-14) and (12-10) AWG

Quick disconnects allow for quickly connecting or disconnecting a terminal. The front

end of the terminal has a female-type receptacle which allows the terminal to slide

onto and off of a male blade. Flags are a type of product that are used when there is

a space constraint, and a regular straight Quick Disconnect is too large.

Piggyback Quick Disconnects can be used when multiple connections (also called

piggyback) are required and there are a limited number of male tabs. The piggyback

actually allows another QD to be connected to its tab and then the piggyback is

connected to a tab.

Spades have the open tongue end used for rapid insertion on the mounting screw.

The spade is usually used on free standing studs.

The Snap plug is a round bullet-like terminal that plugs or "snaps" into the female

receptacle. Snaps are used in a variety of applications where a "quick disconnect"

connection is needed, but there is not enough space for a normal QD coupler. Like a

coupler set, the male and female pieces can be connected and disconnected many

times.

Closed-end connectors are used in a variety of situations to "pigtail" or tie together

2 or more wires.

Butt Splices allow two stripped wires to be inserted into each end and "butt" in the

center, with the crimp securing both wires together.

The Step Down Butt Splice is the perfect solution when 2 wires need to be

inserted in one end of a splice and a single wire in the other end.

76650-0053

Molex / Waldom

Kit assembled in U.S.A.

Product Highlights

Country of Origin:

Certificates:

Insulated Ring, Spade, Butt Splice, Closed-End Solderless Terminal .187" and .250 "

Fully Insulated Female Quick Disconnect with Universal Crimp tool

Terminals

Design

Configuration:

General Information

(Wire-to-Wire) and (Wire-to-Board) / Solderless Terminals

Description:

Product Family:

Part Number:

Manufacturer:

5-6 (M3-3.5)

(Molex Parts within this kit) - EU RoHS Compliant

Specifications

Insulation:

Nylon and PVC

Wire size:

Connector Type:

Tab Sizes:

Solderless Terminals

Stud Sizes:

For additional Molex / Waldom Design and Solution kits please go to www.molexkits.com

Page 1 of 3