X20C04PI-25 datasheet(3/15 Pages) XICOR

Part #	X20C04PI-25

Description	Nonvolatile Static RAM

Download	15 Pages

Scroll/Zoom	100%

Manufacturer	XICOR [Xicor Inc.]

Direct Link	http://www.xicor.com

Logo

3 / 15 page

X20C04

3

Power-Up Recall

Upon power-up (VCC), the X20C04 performs an auto-

matic array recall. When VCC minimum is reached, the

recall is initiated, regardless of the state of

CE, OE, WE

and

NE.

Write Protection

The X20C04 has five write protect features that are

employed to protect the contents of both the nonvolatile

memory and the RAM.

•VCC Sense—All functions are inhibited when VCC is

≤ 3.5V.

• A RAM write is required before a Store Cycle is

initiated.

• Write Inhibit—Holding either

OE LOW, WE HIGH,

CE HIGH, or NE HIGH during power-up and power-

down will prevent an inadvertent store operation.

• Noise Protection—A combined

WE, NE, OE and

CE pulse of less than 20ns will not initiate a Store

Cycle.

• Noise Protection—A combined

WE, NE, OE and

CE pulse of less than 20ns will not initiate a recall

cycle.

DEVICE OPERATION

The

CE, OE, WE and NE inputs control the X20C04

operation. The X20C04 byte-wide NOVRAM uses a

2-line control architecture to eliminate bus contention in

a system environment. The I/O bus will be in a high

impedance state when either

OE or CE is HIGH, or

when

NE is LOW.

RAM Operations

RAM read and write operations are performed as they

would be with any static RAM. A read operation requires

CE and OE to be LOW with WE and NE HIGH. A write

operation requires

CE and WE to be LOW with NE

HIGH. There is no limit to the number of read or write

operations performed to the RAM portion of the X20C04.

Nonvolatile Operations

With

NE LOW, recall operation is performed in the same

manner as RAM read operation. A recall operation

causes the entire contents of the E2PROM to be written

into the RAM array. The time required for the operation

to complete is 5

µs or less. A store operation causes the

entire contents of the RAM array to be stored in the

nonvolatile E2PROM. The time for the operation to

complete is 5ms or less.

SYMBOL TABLE

WAVEFORM

INPUTS

OUTPUTS

Must be

steady

Will be

steady

May change

from LOW

to HIGH

Will change

from LOW

to HIGH

May change

from HIGH

to LOW

Will change

from HIGH

to LOW

Don’t Care:

Changes

Allowed

Changing:

State Not

Known

N/A

Center Line

is High

Impedance

Similar Part No. - X20C04PI-25

Manufacturer	Part #	Datasheet	Description
Xicor Inc.	X20C05	82Kb / 19P	High Speed AUTOSTORE??NOVRAM
	X20C05D-35	82Kb / 19P	High Speed AUTOSTORE??NOVRAM
	X20C05D-45	82Kb / 19P	High Speed AUTOSTORE??NOVRAM
	X20C05D-55	82Kb / 19P	High Speed AUTOSTORE??NOVRAM
	X20C05DI-35	82Kb / 19P	High Speed AUTOSTORE??NOVRAM

More results

Similar Description - X20C04PI-25

Manufacturer	Part #	Datasheet	Description
Xicor Inc.	X2212	361Kb / 8P	Nonvolatile Static RAM
	X22C12	60Kb / 12P	Nonvolatile Static RAM
	X22C10	60Kb / 12P	Nonvolatile Static RAM
	X24C44	60Kb / 15P	Serial Nonvolatile Static RAM
ON Semiconductor	CAT22C10J-30	177Kb / 10P	256-Bit Nonvolatile CMOS Static RAM Doc. No. MD-1082, Rev. R
ON Semiconductor	CAT22C10LI-20	177Kb / 10P	256-Bit Nonvolatile CMOS Static RAM Doc. No. MD-1082, Rev. R
Catalyst Semiconductor	CAT22C10	70Kb / 10P	256-Bit Nonvolatile CMOS Static RAM
Catalyst Semiconductor	CAT22C10	508Kb / 10P	256-Bit Nonvolatile CMOS Static RAM
ON Semiconductor	CAT22C10	177Kb / 10P	256-Bit Nonvolatile CMOS Static RAM Doc. No. MD-1082, Rev. R
ON Semiconductor	CAT24C44	65Kb / 9P	256-Bit Serial Nonvolatile CMOS Static RAM Doc. No. MD-1083, Rev. T

More results

X20C04PI-25 Datasheet(PDF) 3 Page - Xicor Inc.

X20C04PI-25 Datasheet(HTML) 3 Page - Xicor Inc.

Similar Part No. - X20C04PI-25

Similar Description - X20C04PI-25

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Datasheet Download

Link URL