VOIDLESS HERMETICALLY SEALED

ULTRA FAST RECOVERY GLASS

POWER RECTIFIERS

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 1

Copyright

© 2007

10-03-2007 REV B

S C O T TS DALE DIVISION

1N6073 thru 1N6081

DESCRIPTION

APPEARANCE

This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-

19500/503 and is ideal for high-reliability applications where a failure cannot be

different package sizes for working peak reverse voltages from 50 to 150 volts are

hermetically sealed with voidless-glass construction using an internal “Category I”

metallurgical bond.

These devices are also available in surface mount MELF

package configurations by adding a “US” suffix (see separate data sheet for

1N6073US thru 1N6081US).

Microsemi also offers numerous other rectifier

products to meet higher and lower current ratings with various recovery time speed

requirements including standard, fast and ultrafast device types in both through-hole

and surface mount packages.

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

Popular JEDEC registered 1N6073 to 1N6081 series

•

Voidless hermetically sealed glass package

•

Extremely robust construction

•

Triple-layer passivation

•

Internal “Category I” Metallurgical bonds

•

JAN, JANTX, and JANTXV available for 1N6074 and

1N6075 per MIL-PRF-19500/503

•

Further options for screening in accordance with MIL-

PRF-19500 for JAN, JANTX, JANTXV, or JANS by

using a MQ, MX, MV or SP prefix respectively , e.g.

MX6076, MV6079, SP6081, etc.

•

Surface mount equivalents also available in a square

end-cap MELF configuration with “US” suffix

•

Ultrafast recovery rectifier series 50 to 150 V

•

Military and other high-reliability applications

•

Switching power supplies or other applications

requiring extremely fast switching & low forward

loss

•

High forward surge current capability

•

Low thermal resistance

•

Controlled avalanche with peak reverse power

capability

•

MicroNote 050

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

1N6073-6075, 75 Amps for 1N6076-6078, and 175

Amps for 1N6079-6081 at 8.3 ms half-sine wave

• Average Rectified Forward Current (I

(L= 0 inch from body):

1N6073 thru 1N6075: 3.0 Amps

1N6076 thru 1N6078: 6.0 Amps

1N6079 thru 1N6081: 12.0 Amps

1N6073 thru 1N6075: 0.85 Amps

1N6076 thru 1N6078: 1.3 Amps

1N6079 thru 1N6081: 2.0 Amps

1N6073-6075, 8.5

5.0

•

CASE: Hermetically sealed voidless hard glass

with Tungsten slugs

•

TERMINATIONS: Axial-leads are Copper with

Tin/Lead (Sn/Pb) finish

•

MARKING: Body painted and part number, etc.

•

POLARITY: Cathode indicated by band

•

Tape & Reel option: Standard per EIA-296

•

Weight: 1N6073 thru 1N6075: 340 mg

1N6076 thru 1N6078: 750 mg

1N6079 thru 1N6081: 1270 mg

•

See package dimensions on last page