SSF67V

continuous output level transducer

ISO

Competitive part number cross-reference available at:

www.cynergy3.com

© 2007 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp.

USA

Cynergy3 Components

2320 Paseo de las Americas, Suite 104

San Diego, CA 92154

Sales & Tech Support (866) 258-5057

Email: sales@cynergy3.com

EUROPE - UK

Cynergy3 Components Ltd.

7 Cobham Road

Ferndown Industrial Estate

Wimborne, Dorset BH21 7PE

Telephone +44 (0) 1202 897969

Fax +44 (0) 1202 891918

Email:sales@cynergy3.com

This transducer will give an output of 4-20mA

over a measuring span of up to 2500mm. The

output changes from 4 mA at low level to 20

mA at high level.

The transducer is top mounting, via a

screwed entry, has a brass or stainless steel

shaft and either a stainless steel or foamed

float, and is normally installed from outside

the tank. Volt free reed switches and resistors

are mounted in the stem, to provide a varying

resistance, as the float rises or falls, which

is then converted into a 4 to 20mA stepped

output.

Mechanical Dimensions

All dimensions are in millimeters (inches)

TM

4-20mA transducer for safe area use

Maximum process temperature 100°C

Maximum span 2500mm

Standard 10mm stepped accuracy

Standard screw entry G1.0” to G2.5”

Standard Parts

Upper Level

Measuring Span

Screw Entry

Float Material

SSF67V70S500

70mm

500mm

G1”

D300 PVC Foam

SSF67V70S1000

70mm

1000mm

G1”

D300 PVC Foam

SSF67V70S1500

70mm

1500mm

G1”

D300 PVC Foam

Mechanical

IP 65 enclosure in die cast Aluminium Alloy, hard anodised or polyester finish, with Nitrile O-ring and M20x1.5

conduit entry.

Stem assembly in Brass or Stainless Steel, fully silver soldered or TIG welded construction

Screwed entry mounting G1.0” to G2.5”

Float can be constructed in either Stainless Steel 316L, High temperature plastic foam or D300 closed cell PVC

Maximum Process Temperature 100°C

Maximum Ambient Temperature 70°C

Minimum high level 70mm

Maximum measurement span 2500mm

Standard 10mm stepped accuracy

Electrical

Output 4 to 20mA. 4 mA can be either High or Low

Input supply required is 15 to 30 Vdc

Can be connected to analogue or digital displays

Standards and Approvals

This design is tested to and meets the following standards:

DEFSTAN 59-41 Iss.4 :1992

BS1597 : 1995

2&3 EN50081-1 :1992

EN50082-1 : 1992

MED

ER

G1.0"

M20 x 1.5

70mm

(2.75”)

70mm

(2.75”)

1mm

(0.04”)

15mm

(0.6”)

70mm

(2.75”)

Min High Level

Max Span 2500mm (9.8”)

70mm

(2.75”)

30mm

(1.2”)

20mm

(0.8”)

14mm

(0.6”)

VIEW A

VIEW A

HEXAGON AF 47mm