Electronic Components Datasheet Search |
|
D2VW-5L1B-1HS Datasheet(PDF) 2 Page - Omron Electronics LLC |
|
D2VW-5L1B-1HS Datasheet(HTML) 2 Page - Omron Electronics LLC |
2 / 8 page 208 Sealed Snap Action Switch D2VW Specifications ■ Characteristics Note: 1. Data shown are of initial value. 2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate. 3. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, the values apply at the total travel position. 4. The operating temperature of the lead wire (AV0.75f) for non-UL/CSA molded lead wire models is between -40 to 85 °C. ■ Ratings (reference values) D2VW-5 D2VW-01 Note: 1. The resistive load ratings apply under the following test conditions: Ambient Temperature = 20 ±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min. 2. The above current ratings are the values of the steady-state current. 3. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC). 4. Lamp load has an inrush current of 10 times the steady-state current. 5. Rating for UL/CSA approval is as follows (See “Approved Standards” section): Model D2VW-01 D2VW-5 Operating speed 0.1 mm to 1 m/s (at pin plunger) Operating frequency Mechanical: 300 operations/minute max. Electrical: 30 operations/minute max. Insulation resistance 100 M Ω min. (at 500 VDC) Contact resistance 50 m Ω max. (100 mΩ max. for molded lead wire models) Dielectric strength (See note 2) 1,000 VAC, 50/60 Hz for 1 min. between terminals of the same polarity 1,500 VAC, 50/60 Hz for 1 min. between each current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts. Vibration resistance (See note 3) Malfunction: 10 to 55 Hz, 1.5 mm double amplitude Shock resistance (See note 3) Destruction: 1,000 m/s2 (approx. 100G) max. Malfunction: 300 m/s2 (approx. 30G) max. Degree of protection IEC IP67 (excluding the terminals on terminal models). Degree of protection against electric shock Class I Proof tracking index (PTI) 175 Ambient operating temperature -40 ° to 85°C (at 60% RH max.) with no icing Ambient operating humidity 95% max. (for 5 °C to 35°C) Life expectancy Mechanical 10,000,000 operations min. at 60 operations per minute Electrical 1,000,000 operations min. at 30 ops. per minute. 100,000 operations min. at 30 ops. per minute Weight Approx. 7g (pin plunger models without wires) Rated Voltage Non-inductive load Inductive load Resistive load Lamp load Inductive load Motor load NC NO NC NO NC NO NC NO 125 VAC 5 A 0.5 A 4 A — 250 VAC 5 A 0.5 A 4 A — 30 VDC 5 A3 A4 A— 125 VDC 0.4 A 0.1 A 0.4 A — Rated Voltage Non-inductive load Inductive load Resistive load Lamp load Inductive load Motor load NC NO NC NO NC NO NC NO 125 VAC 0.1 A — — — 30 VDC 0.1 A — — — D2VW-01 0.1A @ 125 VAC 0.1A @ 30 VDC D2VW-5 3A @ 125 VAC, 250 VAC |
Similar Part No. - D2VW-5L1B-1HS |
|
Similar Description - D2VW-5L1B-1HS |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |