Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Shielded PowerInductors–XPL7030
Document 568-1
Document 568-1
Revised 10/15/09
• Large terminations for excellent thermal management
• Soft saturation makes them ideal for VRM/VRD applications.
• XPL7030-102 specified by NSC in AN-1900 as L1
• XPL7030-682 specified by STMicro for the LED7707
Inductance2
DCR (mOhms)3
SRF typ4
Isat (A)5
Irms (A)6
Part number1
±20%(µH)
typ
max
(MHz)
10% drop
20% drop
20°C rise
40°C rise
XPL7030-131ML_
0.13
1.94
2.13
241
40
57
23.8
31.3
XPL7030-281ML_
0.28
3.05
3.36
137
28
44
18.6
24.6
XPL7030-471ML_
0.47
4.18
4.59
83
22
34
16.6
21.6
XPL7030-701ML_
0.70
5.40
5.94
64
20
32
13.5
17.6
XPL7030-102ML_
1.0
6.70
7.37
50
19.0
29
12.0
16.4
XPL7030-122ML_
1.2
10.50
11.55
43
14.3
22.2
10.1
13.9
XPL7030-152ML_
1.5
12.10
13.31
40
13.2
20.2
9.2
12.3
XPL7030-182ML_
1.8
17.20
18.92
31
10.6
16.6
7.5
10.0
XPL7030-222ML_
2.2
19.31
21.24
29
10.5
16.0
7.1
9.7
XPL7030-272ML_
2.7
20.66
22.72
26
9.8
14.5
6.5
8.8
XPL7030-332ML_
3.3
25.15
27.66
22
9.0
14.0
5.8
8.5
XPL7030-472ML_
4.7
40.10
44.11
16
6.8
10.5
4.8
6.4
XPL7030-682ML_
6.8
58.50
64.35
13
5.8
9.4
4.0
5.2
XPL7030-822ML_
8.2
62.20
68.42
12
5.2
8.2
3.8
5.0
XPL7030-103ML_
10
88.30
97.13
11
4.4
7.2
3.2
4.4
XPL7030-223ML_
22
191.0
210.0
7.3
3.0
4.7
2.1
2.8
1. When ordering, please specify packaging code:
XPL7030-103ML
C
Packaging: C =7
″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D =13
″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not
stocked (1500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent
on many factors including pcb land
pattern, trace size, and proximity to
other components. Therefore
temperature rise should be verified
in application conditions.
Designer’s Kit C430 contains 3 each of all values
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 0.74 g
Core and winding loss
See www.coilcraft.com/coreloss
Ambient temperature –40°C to +125°C. The part can be operated
without damage as long as the part (ambient temperature plus
temperature rise due to self heating) does not exceed +165°C
Storage temperature Component: –40°C to +165°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/7
″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth
PCB washing Only pure water or alcohol recommended