© Coilcraft, Inc. 2006
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors - LPT1606 Series
Document 214 -1
Document 214-1
Revised 04/27/05
The LPT1606 Power Wafer® is a very small self-shielded
power inductor. Its toroid construction minimizes stray
noise while its 2 mm height and tiny footprint free up
board space.
The 1 µH part has a saturation current rating of 3 A,
remarkable for an inductor this size.
DCR
SRF
Part
L ±20%2
max
typ
Isat3 Irms4
number1
(µH)
(Ohms)
(MHz)
(A)
(A)
LPT1606-102ML_
1.0
0.11
840
3.0
2.0
LPT1606-152ML_
1.5
0.13
505
2.4
1.8
LPT1606-222ML_
2.2
0.16
360
1.8
1.6
LPT1606-332ML_
3.3
0.195
230
1.6
1.5
LPT1606-472ML_
4.7
0.24
165
1.2
1.5
LPT1606-682ML_
6.8
0.345
130
1.1
1.3
LPT1606-103ML_
10
0.44
80
0.8
1.1
LPT1606-153ML_
15
0.65
60
0.7
.9
LPT1606-223ML_
22
0.83
25
0.6
.8
This product has been discontinued
as of September 1, 2000
A recommended alternative is the DO1606 Series. Existing customers
will be supported. For more information, please contact Coilcraft.
Terminations:
Silver-palladium-platinum
Tape and reel:
750/7
″ reel; 2500/13″ reel 8 mm tape width
1. When ordering, please specify packaging code:
LPT1606ML
C
Packaging:
C =7
″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D =13
″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DC current at which the inductance drops 30% (typ) from its value
without current.
4. Average current for a 40°C temperature rise from 25°C ambient.
5. Operating and storage temperature range –40°C to +85°C.
6. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Typical L vs Current