Data Sheet

March 2008

FLTR100V10 Filter Module

75 Vdc Input Maximum, 10 A Maximum

The FLTR100V10 Filter Module is encapsulated in a small,

nonconductive plastic case.

Application

n

Common-mode and differential-mode filtering of

power supply dc input and output lines

n

Computer applications

n

Communications equipment

Features

n

Compatible with RoHS EU Directive 200295/EC

n

Compatible in Pb- free or SnPb reflow environment

n

Small size: 51 mm x 28 mm x 12 mm

(2.0 in. x 1.1 in. x 0.46 in.)

n

Optimized for use with high-frequency dc-to-dc

power modules

n

Printed-circuit board mountable

n

Operating case temperature range:

–40 °C to +100 °C

n

Certified; VDE 0805 (IEC60950) Licensed

n

CE mark meets 73/23/EEC and 93/68/EEC

Options

n

Short pin: 2.8 mm (o.110 in.)

n

Short pin: 3.7 mm (0.145 in.)

n

Short pin: 4.6 mm (0.180 in.)

RoHS Compliant

Description

The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode

noise on input or output lines of high-frequency switching power supplies. The module has a maximum current

rating of 10 A. It provides high insertion loss throughout the frequency range regulated by the U.S. Federal

Communications Commission (FCC) and the International Special Committee on Radio Interference (CISPR)

for conducted emissions.

The module is 51 mm long, 28 mm wide, and 12 mm high (2.0 in. x 1.1 in. x 0.46 in.) and mounts on a PC board

in a natural convection or forced-air environment.

* UL is a registered trademark of Underwriters Laboratories, Inc.

† CSA is a registered trademark of Canadian Standards Assn.

‡ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should

be followed. (The CE mark is placed on selected products.)