Data Sheet

November 9, 2006

EQD020 Series Single Output: Eighth Brick Power Modules:

19-60 Vdc Input; 3.3Vdc Output; 66W

Tyco Electronics Power Systems

2

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are

absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in

excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for

extended periods can adversely affect the device reliability.

Parameter

Device

Symbol

Min

Max

Unit

Input Voltage

Continuous, Operational

F

-0.3

60

Vdc

Transient, Operational (10mS minimum)

F

75

Vdc

Transient , Non-operational (100 mS maximum)

F

100

Vdc

Operating Ambient Temperature

(see Thermal Considerations section)

F

-40

85

°C

Storage Temperature

F

-55

125

°C

I/O Isolation

Input – Output (100% factory Hi-Pot tested)

F

1500

Vdc

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature

conditions.

Parameter

Device

Symbol

Min

Typ

Max

Unit

Operating Input Voltage

F

19

24/48

60

Vdc

Maximum Input Current

F

5

Adc

Input Stand-by Current

F

25

mA

Input No Load Current

F

110

mA

Inrush Transient

F

I

1

A

Input Reflected Ripple Current, peak-to-peak

(5Hz to 20MHz, 12μH source impedance;

F

30

mAp-p

Input Ripple Rejection (100 - 120Hz)

F

50

dB

CAUTION: This power module is not internally fused. An input line fuse must always be used.

This power module can be used in a wide variety of applications, ranging from simple standalone operation to being

part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to

achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a very

fast-acting surface mount fuse with a maximum rating of 6.3 A (see Safety Considerations section). Based on the

information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a

lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.