 |
 |
|
| MCP6L71RT-ESLASHOT |
|
|||||||||||||||||
 MICROCHIP
|
| |||||||||||||||||
|
3 page 
© 2009 Microchip Technology Inc. DS22145A-page 3 MCP6L71/1R/2/4 1.0 ELECTRICAL CHARACTERISTICS 1.1 Absolute Maximum Ratings † VDD –VSS ........................................................................7.0V Current at Input Pins ....................................................±2 mA Analog Inputs (VIN+ and VIN–) †† .. VSS –1.0VtoVDD +1.0V All other Inputs and Outputs .......... VSS – 0.3V to VDD +0.3V Difference Input Voltage ...................................... |VDD –VSS| Output Short Circuit Current ................................ Continuous Current at Output and Supply Pins ............................±30 mA Storage Temperature ................................... –65°C to +150°C Junction Temperature (TJ) .........................................+150°C ESD Protection On All Pins (HBM/MM) ................ ≥ 4 kV/400V † Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. 1.2 Specifications TABLE 1-1: DC ELECTRICAL SPECIFICATIONS Electrical Characteristics: Unless otherwise indicated, TA = +25°C, VDD =5.0V, VSS = GND, VCM =VDD/2, Parameters Sym Min Typ Max Units Conditions Input Offset Input Offset Voltage VOS –4 ±1 +4 mV Input Offset Temperature Drift ΔV OS/ΔTA — ±1.3 — µV/°C TA = –40°C to +125°C, Power Supply Rejection Ratio PSRR — 89 — dB Input Bias Current and Impedance Input Bias Current IB —1 — pA IB —50 — pA TA= +85°C IB — 2000 — pA TA= +125°C Input Offset Current IOS —±1 — pA Common Mode Input Impedance ZCM —1013||6 — Ω||pF Differential Input Impedance ZDIFF —1013||3 — Ω||pF Common Mode Common Mode Input Voltage Range VCMR -0.3 — +5.3 V Common Mode Rejection Ratio CMRR — 91 — dB VCM = –0.3V to 5.3V Open-Loop Gain DC Open-Loop Gain (Large Signal) AOL —105 — dB VOUT = 0.2V to 4.8V, VCM =VSS Output Maximum Output Voltage Swing VOL — — 0.020 V G = +2 V/V, 0.5V input overdrive VOH 4.980 — — V G = +2 V/V, 0.5V input overdrive Output Short Circuit Current ISC —±25 — mA Note 1: For design guidance only; not tested. |
