• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1

Double-Balanced Mixer

Rev. V2

M1J

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• LO and RF: 300 to 2000 MHz

• IF: DC to 1000 MHZ

• LO Drive +7 dBm (nominal)

• High Isolation 50 dB (Typ.)

Guaranteed Specifications

1

Characteristics

Min

Typ.

Max.

Test Conditions

SSB Conversion Loss

And

SSB Noise Figure

6.0 dB

6.5 dB

8.0 dB

8.0 dB

9.5 dB

7.5 dB

8.0 dB

9.0 dB

9.0 dB

10.0 dB

fL & fR = 1000 to 1700 MHz

fI = 10 to 500 MHz

fI = 500 to 1000 MHz

fL & fR = 600 to 2000 MHz

fI = 10 to 1000 MHz

fL & fR = 300 to 2000 MHz

fI =10 to 450 MHz

fI = 450 to 1000 MHz

Isolation

L at R

L at I

L at R

L at I

40 dB

25 dB

30 dB

20 dB

45 dB

35 dB

40 dB

30 dB

fL 300 to 1000 MHz

fL 1000 to 2000 MHz

Conversion Compression

1.0 dB

fR level = 0 dBm

Desensitization

1.0 dB

fR2 level = -2 dBm

Absolute Maximum Ratings

Weight 31 gram (1.1 oz) max.

Storage Temperature

-65

Operating Temperature

-54

Peak RF Input Power

+26 dBm at +25

to +17 dB, at +100

Peak Input Current at 25

50 mA DC

Notes:

1. Measure in a 50-Ohm system with nominal LO drive and

downconverter application only, unless otherwise specified. The

I-Port frequency range extends to DC for phase detection, pulse

modulation, or attenuator applications, I-Port VSWR degrades

from a 50-Ohm system at low IF frequencies.