• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1

Low Cost Three Way Power Splitter/Combiner

824 – 960 MHz

Rev. V4

DS53-0001

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Small Size and Low Profile

• Excellent Insertion Loss 0.6 dB Typical

• Superior Repeatability

• Low Cost

• CSM, AMPS, CDPD, ARDIS, RAM Frequency

Coverage

• SOIC-8 Package

Description

M/A-COM’s DS53-0001 is an IC-based monolithic

power divider in a low cost SOIC-8 plastic package.

This 3-way power divider is ideally suited for applica-

tions where small size, low profile, and low cost with-

out sacrificing Performance, are required. Typical

applications include Base Stations, portables and

PCMCIA cards for cellular applications. Available in

Tape and Reel.

The DS53-0001 is fabricated using a passive-

integrated circuit process. The process features full-

chip passivation for increased performance and reli-

ability.

Ordering Information

Part Number

Package

DS53-0001

Bulk Packaging

DS53-0001-TR

1000 piece reel

DS53-0001SAM

Sample Test Board

Note: Reference Application Note M513 for reel size

information.

Functional Block Diagram

1

Pin Configuration

Pin No.

Function

Pin No.

Function

1

GND

5

RF OUT

2

RF IN

6

GND

3

GND

7

RF OUT

4

GND

8

RF OUT

1.

All unused pins must be RF and DC grounded.