 |
 |
|
| P2183AF-08-TR |
|
|||||||||||||||||
 PULSECORE
|
| |||||||||||||||||
|
3 page 
Low EMI Clock for Mobile VGA 3 of 9 November 2006 P2180 / 81 / 82 / 83 / 84 rev 1.1 Notice: The information in this document is subject to change without notice. Input Frequency and Modulation Rate Part Number Input Frequency Range (MHz) Output Frequency Range (MHz) Modulation Rate P2180/P2184 20 to 40 20 to 40 Input frequency / 768 P2181 60 to 160 60 to 160 Input frequency / 2048 P2182/P2183 10 to 20 10 to 20 TBD Spread Deviation Selections Part Number SRS Spread Deviation 0 -1.25% (Down) P2180/1/2/3/4 A 1 -1.75% (Down) 0 ± 1.25% (Center) P2180/1/2/3/4 B 1 ± 1.75% (Center) 0 -2.50% (Down) P2180/1/2/3/4 C 1 -3.50 (Down) 0 ± 0.625%(Center) P2180/1/2/3/4 D 1 ± 0.875% (Center) Absolute Maximum Ratings Symbol Parameter Rating Unit VDD, VIN Voltage on any pin with respect to Ground -0.5 to +4.6 V TSTG Storage temperature -65 to +125 °C TA Operating temperature 0 to +70 °C Ts Max. Soldering Temperature (10 sec) 260 °C TJ Junction Temperature 150 °C TDV Static Discharge Voltage (As per JEDEC STD22- A114-B) 2 KV Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. |
