 |
 |
|
| P2183 |
|
|||||||||||||||||
 PULSECORE
|
| |||||||||||||||||
|
4 page 
Low EMI Clock for Mobile VGA 4 of 9 November 2006 P2180 / 81 / 82 / 83 / 84 rev 1.1 Notice: The information in this document is subject to change without notice. DC Electrical Characteristics Unless otherwise noted, VDD = 3.3V and TA =25°C Symbol Parameter Min Typ Max Unit VIL Input low voltage GND – 0.3 - 0.8 V VIH Input high voltage - - VDD + 0.3 V IIL Input low current (input SRS) -60.0 - -20.0 µA IIH Input high current - - 1.00 µA IXOL XOUT output low current (@ 0.4V, VDD = 3.3V) 2.00 - 12.00 mA IXOH XOUT output high current (@2.5V, VDD = 3.3V) - - 12.00 mA VOL Output low voltage (VDD = 3.3V, IOL = 20mA) - - 0.4 V VOH Output high voltage (VDD = 3.3V, IOH = 20mA) 2.8 - - V ICC Dynamic supply current normal mode (3.3V and 10pF loading) 8.6 fIN - min - 27.0 fIN - max mA IDD Static supply current standby mode - 4.5 - mA VDD Operating voltage - 3.3 - V tON Power up time (first locked clock cycle after power up) - - - mS ZOUT Clock output impedance - - - Ω AC Electrical Characteristics Symbol Parameter Min Typ Max Unit fIN Input frequency 10 - 160 MHz fOUT Output frequency 10 - 160 MHz tLH* Output rise time (measured at 0.8V to 2.0V) - 0.69 - ns tHL* Output fall time (measured at 2.0V to 0.8V) - 0.66 - ns tJC Jitter (cycle to cycle) -200 - 200 ps tD Output duty cycle 45 50 55 % * tLH and tHL are measured into a capacitive load of 15pF |
