 |
 |
|
| SR5418 |
|
||||||||||
 VANLONG
|
| ||||||||||
|
1 page 
318.00 MHz One Port SAW Resonator Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.vanlong.com © 2004 by Vanlong Technology Co., Ltd. SR5418 • Ideal for 318.00 MHz Transmitters • Very Low Insertion Loss • Quartz Stability • Ultra Miniature Ceramic SMD Package (QCC4A) Absolute Maximum Rating (Ta=25 °C) Parameter Rating Unit CW RF Power Dissipation P 0 dBm DC Voltage VDC ±30 V Operating Temperature Range TA -10 ~ +60 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit Frequency (25 °C) Nominal Frequency Tolerance from 318.00 MHz fc ∆f c NS - 318.00 - NS ± 75 MHz KHz Insertion Loss IL - 1.2 1.8 dB Quality Factor Unloaded Q-Value 50 Ω Loaded Q-Value Qu Q L - - 14,550 1,900 - - - - Temperature Stability Turnover Temperature Turnover Frequency Frequency Temperature Coefficient To fo FTC 25 - - - fc 0.032 55 - - °C KHz ppm/ °C2 Frequency Aging Absolute Value during the First Year |f A| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - M Ω RF Equivalent RLC Model Motional Resistance Motional Inductance Motional Capacitance Shunt Static Capacitance R M L M C M Co - - - 2.4 15.0 109.4119 2.2917 2.7 23.0 - - 3.0 Ω µH fF pF NS = Not Specified Note: 1. The frequency fc is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test system with VSWR ≤ 1.2:1. 2. Unless noted otherwise, case temperature TC = +25°C±2°C. 3. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. 4. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at any case temperature, TC, may be calculated from: f = fo [1 - FTC (TO - TC) 2]. 5. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is the measured static (nonmotional) capacitance between input terminal and ground or output terminal and ground. The measurement includes case parasitic capacitance. 6. Derived mathematically from one or more of the following directly measured parameters: fc, IL, 3 dB bandwidth, fC versus TC, and Co. 7. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 8. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. 9. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 10. For questions on technology, prices and delivery, please contact our sales offices or e-mail to sales@vanlong.com. SR5418 |
