-43-

H HiTRON

UNIVERSAL INPUT HARMONIC CORRECTION

AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS

INTERNAL SWITCHING POWER SUPPLIES HVP100 SERIES

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES

MEET IEC 61000-3-2 HARMONIC CORRECTION

MEET UNIVERSAL SAFETY STANDARDS

EMI MEET CISPR PUB. 22 CLASS B

CE MARKING COMPLIANCE

For the details of safety approval, please consult the factory.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Connector: B-S connector.

Output Wattage: Typ. 100 Watts.

Line Regulation: Typ. 1.0%.

Load Regulation: Main VO1 typ. ±1.0%.

Noise & Ripple: Typ. 1.0% peak to peak.

OVP: Built-in at main VO1 only.

Remote Sense: Installed in VO1.

Adjustability: Available at main O/P VO1.

Overload Protection (OLP):

Fully protected against output overload and short circuit.

OLP set at about 125-150% rating output wattage.

Consult the factory for OLP setting.

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typ. 90-264Vac with PFC.

Input Connector: B-S connector.

Input Frequency: 47-63Hz.

Inrush Current: Typ. 20A @230Vac (active).

Input Current: 1.6A@115Vac, 0.6A@230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet CISPR PUB. 22 Class B.

Hold-up Time: Typ. 30mS @ 115Vac & 230Vac.

Power Fail Signal: Installed.

Power Factor Correction: Meet Harmonic Correction

per IEC 61000-3-2.PF typ. 0.98.

Earth Leakage: Less than 0.5mA.

GENERAL SPECIFICATION

Efficiency: Typ. 74-79%.

Switching Frequency: Fixed frequency at 85 or 80K Hz.

Circuit Topology: PWM fixed frequency forward circuit.

Transient Response: Output voltage returns in

less than 3mS following

a 25% load change.

Safety Standard: UL 60950-1/EN 60950-1 Class I.

Operating Temperature: 0 to +50°C.

Storage Temperature: -20 to +85°C.

Temperature Coefficient: Typ. 0.04% /°C.

Cooling: Free air convection.

Recommended 20cfm fan cooling for full load.

Construction: Enclosure box or L-bracket format.

Power Density: 2.16Watts / Cubic Inch.

Note: Due to requests in market and advances in technology, specifications subject to change without notification.