Electronic Components Datasheet Search |
|
H122E Datasheet(PDF) 2 Page - MicroPower Direct, LLC |
|
H122E Datasheet(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page Notes: 1. Output load regulation is specified for a load change of 10% to 100%. 2. When measuring output ripple, it is recommended that an external 0.33 µF ceramic capacitor be placed from the +Vout pin to the -Vout pin. 3. During operation, care must be taken not to exceed the specified input range of the unit or to allow the output load to drop below the specified minimum (10% of full load). Operating the unit under either of these conditions could cause damage to the unit. 4. These converters are specified for operation without external components. However, in some applications the addition of input/output capacitors will enhance stability and reduce output ripple. Recommended capacitor values are: Vin Input Capacitor Vout Output Capacitor 3.3 VDC 4.7 µF 3.3 VDC 10.0 µF 5 VDC 4.7 µF 5 VDC 10.0 µF 12 VDC 2.2 µF 9 VDC 4.7 µF 24 VDC 1.0 µF 12 VDC 2.2 µF 15 VDC 1.0 µF For applications requiring very low output noise levels, a simple LC filter should be effective. 5. It is recommended that a fuse be used on the input of a power supply for protection. See the table above for the correct rating. Model Selection Guide Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) • Pin 1 is marked by a “dot” or indentation on the top of the unit Mechanical Dimensions Pin Connections Model Number Input Output Load Regulation (%, Max) Efficiency (%, Typ) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load H101E 5 4.5 - 5.5 278 25 3.3 303.0 30.0 20 72 500 H102E 5 4.5 - 5.5 286 25 5.0 200.0 20.0 15 70 500 H103E 5 4.5 - 5.5 256 25 9.0 111.0 12.0 10 78 500 H104E 5 4.5 - 5.5 252 25 12.0 83.0 9.5 10 79 500 H105E 5 4.5 - 5.5 251 25 15.0 67.0 7.0 10 80 500 H111E 12 10.8 - 13.2 116 16 3.3 303.0 30.0 20 72 200 H112E 12 10.8 - 13.2 118 16 5.0 200.0 20.0 15 71 200 H113E 12 10.8 - 13.2 109 16 9.0 111.0 12.0 10 76 200 H114E 12 10.8 - 13.2 106 16 12.0 83.0 9.0 10 78 200 H115E 12 10.8 - 13.2 105 16 15.0 67.0 7.0 10 80 200 H121E 24 21.6 - 26.4 56 8 3.3 303.0 30.0 20 74 100 H122E 24 21.6 - 26.4 57 8 5.0 200.0 20.0 15 73 100 H123E 24 21.6 - 26.4 53 8 9.0 111.0 12.0 10 78 100 H124E 24 21.6 - 26.4 53 8 12.0 83.0 9.0 10 79 100 H125E 24 21.6 - 26.4 53 8 15.0 67.0 7.0 10 80 100 H151E 3.3 3.0 - 3.6 421 55 3.3 303.0 30.0 20 72 750 H152E 3.3 3.0 - 3.6 410 55 5.0 200.0 20.0 20 74 750 Pin Function 1-Vin 4+Vin 5 +Vout 7 -Vout MicroPower Direct www.micropowerdirect.com 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Derating Curve |
Similar Part No. - H122E |
|
Similar Description - H122E |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |