Electronic Components Datasheet Search |
|
E113I Datasheet(PDF) 2 Page - MicroPower Direct, LLC |
|
E113I Datasheet(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page Notes: 1. Output load regulation is specified for a load change of 20% to 100%. 2. When measuring output ripple, it is recommended that an external 0.33 µF ceramic capacitor be placed from the +Vout pin to the -Vout pin. 3. Operation at no-load will not damage these units. How- ever, they may not meet all specifications. 4. The 5V, 12V and 24V input units do not require external components to operate, but the use of a low ESR capaci- tor (approximately 10 uF, ESR <1.0Ω at 100 kHz) mounted close to the converter input pins is recommended. For 48 VDC input units, an input capacitor should always be used. Dependent upon the application, a value be- tween 4.7 µF and 47 uF should be sufficient. 5. It is recommended that a fuse be used on the input of a power supply for protection. See the table above for the correct rating. Model Number Input Output Load Regulation (% Max) Efficiency (%, Typ) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load E101I 5 4.5 - 5.5 267 25 5.0 200.0 4.0 10 75 500 E102I 5 4.5 - 5.5 260 25 9.0 111.0 2.0 10 77 500 E103I 5 4.5 - 5.5 256 25 12.0 83.3 2.0 10 78 500 E104I 5 4.5 - 5.5 257 25 15.0 66.6 2.0 10 78 500 E105I 5 4.5 - 5.5 257 25 24.0 41.6 2.0 10 78 500 E111I 12 10.8 - 13.2 112 16 5.0 200.0 4.0 10 75 200 E112I 12 10.8 - 13.2 109 16 9.0 111.0 2.0 10 77 200 E113I 12 10.8 - 13.2 107 16 12.0 83.3 2.0 10 78 200 E114I 12 10.8 - 13.2 107 16 15.0 66.6 2.0 10 78 200 E115I 12 10.8 - 13.2 107 16 24.0 41.6 2.0 10 78 200 E121I 24 21.6 - 26.4 56 10 5.0 200.0 4.0 10 75 100 E122I 24 21.6 - 26.4 55 10 9.0 111.0 2.0 10 77 100 E123I 24 21.6 - 26.4 54 10 12.0 83.3 2.0 10 78 100 E124I 24 21.6 - 26.4 54 10 15.0 66.6 2.0 10 78 100 E125I 24 21.6 - 26.4 54 10 24.0 41.6 2.0 10 78 100 E131I 48 43.2 - 52.8 28 7 5.0 200.0 4.0 10 75 50 E132I 48 43.2 - 52.8 27 7 9.0 111.0 2.0 10 76 50 E133I 48 43.2 - 52.8 27 7 12.0 83.3 2.0 10 76 50 E134I 48 43.2 - 52.8 27 7 15.0 66.6 2.0 10 76 50 E135I 48 43.2 - 52.8 27 7 24.0 41.6 2.0 10 76 50 Models with other outputs are available. Contact the factory for details!! Model Selection Guide Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) • Pin 1 is marked by a “dot” or indentation on the side of the unit • Dimensions indicated on the drawing are as follows: Mechanical Dimensions Pin Description 1-Vin 2+Vin 3 -Vout 4 +Vout Pin Connections (µF Max) 220 Capacitive Load Dimension Input Voltage 5, 12 & 24V 48V “W” 0.24 (6.0) 0.29 (7.5) “X” 0.05 (1.25) 0.08 (2.00) MicroPower Direct www.micropowerdirect.com 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Derating Curve |
Similar Part No. - E113I |
|
Similar Description - E113I |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |