5

2900-FL SERIES

Ordering Information

For more information on this or other products and their availability, please contact your local JDSU account manager or

JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at

customer.service@jdsu.com.

Sample: 29-7402-310-FL

User Safety

Safety and Operating Considerations

The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the

fiber when the device is in operation.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.

Operating the laser diode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with

this component cannot exceed maximum peak optical power.

CW laser diodes may be damaged by excessive drive current or switching transients. When using power supplies, the laser

diode should be connected with the main power on and the output voltage at zero. The current should be increased slowly

while monitoring the laser diode output power and the drive current. Careful attention to heatsinking and proper mounting

of this device is required to ensure specified performance over its operating life. To maximize thermal transfer to the heatsink,

the heatsink mounting surface must be flat to within .001” and the mounting screws must be torqued down to 1.5 in.-lb.

ESD PROTECTION—Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme

precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling laser diodes.

Code

Minimum Kink-Free Power

310

310 mW

320

320 mW

330

330 mW

340

340 mW

350

350 mW

360

360 mW

380

380 mW

400

400 mW

420

420 mW

440

440 mW

460

460 mW

480

480 mW

500

500 mW

Code

Peak Wavelength

7402

973.5 to 975.0 nm

7552

974.5 to 976.5 nm

7602

975.0 to 977.0 nm

7702

976.0 to 978.0 nm

29-

-

-FL