 |
 |
|
| LT1993-4 |
|
|||||||||||||||||
 LINER
|
| |||||||||||||||||
|
5 page 
LT1993-4 5 19934fa Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: As long as output current and junction temperature are kept below the Absolute Maximum Ratings, no damage to the part will occur. Note 3: The LT1993C-4 is guaranteed functional over the operating temperature range of –40°C to 85°C. Note 4: The LT1993C-4 is guaranteed to meet specified performance from 0°C to 70°C. It is designed, characterized and expected to meet specified performance from –40°C and 85°C but is not tested or QA sampled at these temperatures. The LT1993I-4 is guaranteed to meet specified performance from –40°C to 85°C. Note 5: This parameter is pulse tested. Note 6: This parameter is guaranteed to meet specified performance through design and characterization. It has not been tested. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS 3.2VP-P Differential (+OUTFILTERED, –OUTFILTERED) –71 dBc 3.2VP-P Differential (+OUT, –OUT) –69 dBc 3.2VP-P Differential (+OUT, –OUT), RL = 100Ω –66 dBc Third-Order IMD 2VP-P Differential Composite (+OUTFILTERED, –OUTFILTERED), f1 = 49.5MHz, f2 = 50.5MHz –81 dBc 2VP-P Differential Composite (+OUT, –OUT), RL = 100Ω, f1 = 49.5MHz, f2 = 50.5MHz –80 dBc 3.2VP-P Differential Composite (+OUTFILTERED, –OUTFILTERED), f1 = 49.5MHz, f2 = 50.5MHz –72 dBc OIP350M Output Third-Order Intercept Differential (+OUTFILTERED, –OUTFILTERED), f1 = 49.5MHz, f2 = 50.5MHz 43 dBm NF Noise Figure Measured Using DC800A Demo Board 14.1 dB en50M Input Referred Noise Voltage Density 2.25 nV/√Hz 1dB Compression Point 19.7 dBm 70MHz Signal Second/Third Harmonic Distortion 2VP-P Differential (+OUTFILTERED, –OUTFILTERED) –73 dBc 2VP-P Differential (+OUT, –OUT) –71 dBc 2VP-P Differential (+OUT, –OUT), RL = 100Ω –70 dBc Third-Order IMD 2VP-P Differential Composite (+OUTFILTERED, –OUTFILTERED), f1 = 69.5MHz, f2 = 70.5MHz –74 dBc 2VP-P Differential Composite (+OUT, –OUT), RL = 100Ω, f1 = 69.5MHz, f2 = 70.5MHz –71 dBc OIP370M Output Third-Order Intercept Differential (+OUTFILTERED, –OUTFILTERED), f1 = 69.5MHz, f2 = 70.5MHz 40 dBm NF Noise Figure Measured Using DC800A Demo Board 14.5 dB en70M Input Referred Noise Voltage Density 2.35 nV/√Hz 1dB Compression Point 18.5 dBm 100MHz Signal Second/Third Harmonic Distortion 2VP-P Differential (+OUTFILTERED, –OUTFILTERED) –61 dBc 2VP-P Differential (+OUT, –OUT) –63 dBc 2VP-P Differential (+OUT, –OUT), RL = 100Ω –62 dBc Third-Order IMD 2VP-P Differential Composite (+OUTFILTERED, –OUTFILTERED), f1 = 99.5MHz, f2 = 100.5MHz –61 dBc 2VP-P Differential Composite (+OUT, –OUT), RL = 100Ω, f1 = 99.5MHz, f2 = 100.5MHz –63 dBc OIP3100M Output Third-Order Intercept Differential (+OUTFILTERED, –OUTFILTERED), f1 = 99.5MHz, f2 = 100.5MHz 33.5 dBm NF Noise Figure Measured Using DC800A Demo Board 15.1 dB en100M Input Referred Noise Voltage Density 2.55 nV/√Hz 1dB Compression Point 17.8 dBm TA = 25°C, VCCA = VCCB = VCCC = 5V, VEEA = VEEB = VEEC = 0V, ENABLE = 0.8V, +INA shorted to +INB (+IN), –INA shorted to –INB (–IN), VOCM = 2.2V, Input common mode voltage = 2.2V, no RLOAD unless otherwise noted. AC ELECTRICAL CHARACTERISTICS |
