2

TEST AND MEASUREMENT PRODUCTS

E7802

www.semtech.com

PIN Description

Customer Pin Descriptions

Pin Name

Pin Number

Description

DATA[0:1]

30, 11

Digital inputs which determine the high/low output state of the driver, when it is

enabled.

EN[0:1]

29, 12

Digital input which enables/disables the driver.

QH[0:1]

QL[0:1]

32, 9

31, 10

Comparator digital outputs.

DOUT[0:1]

22, 19

Driver Outputs.

VINP[0:1]

24, 17

Comparator Inputs.

VH[0:1]

23, 18

Unbuffered analog inputs that set the driver high voltage level.

VL[0:1])

21, 20

Unbuffered analog inputs that set the driver low voltage level.

CVH[0:1]

27, 14

Analog inputs that set the threshold for the high comparator.

CVL[0:1]

25, 16

Analog inputs that set the threshold for the low comparator.

VDD

2, 3

Digital supply.

GND

7

Ground pad. Connect to 0V.

VCC[0:1]

28, 13

Positive power supply.

VEE

4, 5, Center Pad

Negative power supply.

DVEE[0:1]

26, 15

Driver negative supply.

SCP*

1

Short circuit protection enable pin (has 5.3Kohms internal pull-down to GND).

Connect to VDD if short circuit protection is not required in the application.

INT*

6

Open drain short circuit flag that pulls-down to indicate that a channel of the

E7802 is in short circuit protection mode.

TEMP

8

Connected to anode of temperature sensing diodes.