1
POWER ENTRY MODULES WITHOUT LINE FILTER
D
DC
C1
11
1
www.schurter.com
Actual information about approvals can be found on
http://www.schurter.com/approvals
C14
70° C
D
De
es
sc
crriip
pttiio
on
n
- Panel mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Connector Protection class I, Line switch 1- or 2-pole
- Quick connect terminals 4.8 x 0.8 mm
- Alternative: version with line filter DC12
- Substitute for type KEB1;
KEB2
C
Ch
ha
arra
ac
ctte
erriis
sttiic
cs
s
- Ultra-compact design
- All single elements are already wired
Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
O
Otth
he
err v
ve
errs
siio
on
ns
s o
on
n rre
eq
qu
ue
es
stt::
- snap-in, panel thickness 1 and 3 mm
- unwired versions
- solder terminals
- line switch with other rocker marking
- line switch 1-pole
- for protection class II
T
Te
ec
ch
hn
niic
ca
all d
da
atta
a
Ratings IEC
10 A / 250 VAC; 50 Hz
Ratings UL/CSA
1
2 A / 250 VAC; 50/60 Hz
Dielectric strength
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable operation temp.
-25 °C to 70 °C
Degree of protection
from front side IP40 acc. to IEC 60529
Protection class
Suitable for appliances with protection
class I acc. to IEC 61140
Terminals
Quick connect terminals 4.8 x 0.8 mm
Panel thickness s
Screw-on: max 6 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1/1.5/2/2.5/3 mm
Materials: Housing
Thermoplastic, black, UL 94V-2
Appliance-inlet /-outlet
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
Line switch
Rocker switch 1- or 2-pole, non-illumi-
nated or illuminated red or green, acc.
to IEC 61058-1
Technical details
GENERAL PRO-
DUCT INFORMATION
D
Diim
me
en
ns
siio
on
ns
s
Screw-on mounting