www.vishay.com

7

TIP-5038SDE

Vishay Dale

Document Number: 37071

Revision 28-Jun-01

MOUNTING

The touch panel and display assembly should be mounted in

accordance with mounting instructions specified herein, and

as separately specified by the display manufacturer. The vi-

bration and shock specifications only apply to the complete

assembly when properly mounted in a rigid front panel.

CLEANING

The bezel is manufactured from polycarbonate which is com-

patible with most cleaning agents such as alcohol, window

cleaners, and soap and water. Solvent type cleaning agents

should only be used for wiping. Filters are made from polyes-

ter, polycarbonate, or acrylic and also should withstand the

above cleaning agents. Care must be taken to avoid scratch-

ing the bezel or filter by cleaning with abrasive or coarse cloths,

use only soft cotton. While scratches normally won’t affect the

function of the touch panel, they will degrade the appearance

of the end product and make the display difficult to read.

WARRANTY

Vishay Dale warrants that TIP infrared touch panels will be

free from defects in materials and workmanship, and that they

will function substantially to these specifications. The TIP touch

panels are warranted for one year from shipment from Vishay

Dale. Cosmetic defects (bezel and filter scratches and blem-

ishes) are not warranted unless they are present when the

HOST

TOUCH PANEL

ACTION

Send 22

Enables ENTER point mode

Send 2B

Request report

Send 48

No report is available

Send 2B

Request report

Send 42, 1D, 12

A stylus entered the touch panel.

The coordinates are X29, and

Y18 (decimal) - (See touch Point

Format)

Send 2B

Request report

Send 48

No report is available

product is first delivered from Vishay Dale Electronics. Bezel/

filter assemblies with cosmetic defects must be returned within

30 days of delivery.

The purchaser must return the defective or nonconforming

goods to Vishay Dale not later than 30 days after Vishay Dale’s

issuance of an RMA number. No goods are to be returned

without issuance of an RMA number. For an RMA number,

contact the Vishay Dale’s customer service department with

the model number(s) and original purchase order number(s).

When returning goods for repair, please include a brief de-

scription of the problem, and mark the outside of the shipping

container with the RMA number. The Buyer shall prepay trans-

portation charges, and Vishay Dale shall pay for the return of

the goods to the buyer.

The warranty does not apply in cases of improper or inad-

equate installation or maintenance by the Buyer, unauthorized

modification of the product, operation of the product outside

their environmental specifications, neglect or abuse of the prod-

uct. This warranty is not the full warranty, and should not be

interpreted as a substitute for the full warranty.

ELECTROSTATIC CAUTION

Vishay Dale TIP touch panels use electrostatic sensitive com-

ponents. These assemblies should be unpacked and handled

in an ESD controlled area only. When shipping, use packing

materials designed for protection of electrostatic sensitive com-

ponents.

Vishay Dale Electronics, Inc. believes that the information de-

scribed in this publication is accurate and reliable, and much

care has been taken in its preparation. However, no responsi-

bility, financial, or otherwise, is accepted for any consequences

arising out of the use of this information.

This information is subject to change without notice.