Electronic Components Datasheet Search |
|
M34286 Datasheet(PDF) 4 Page - Renesas Technology Corp |
|
M34286 Datasheet(HTML) 4 Page - Renesas Technology Corp |
4 / 66 page Rev.1.00 Aug 06, 2008 page 4 of 64 REJ03B0251-0100 4286 Group PERFORMANCE OVERVIEW Function 72 2.0 µs (f(XIN) = 4.0 MHz, system clock = f(XIN)/2, VDD = 3.0 V) 2048 words ✕ 9 bits 64 words ✕ 4 bits Eight 1-bit I/O ports with the pull-down function and key-on wakeup function 3-bit I/O port with the pull-down function and key-on wakeup function 4-bit I/O port with the pull-down function and key-on wakeup function 1-bit output port; CMOS output 8-bit timer with a reload register 8-bit timer with two reload registers 4 levels (However, only 3 levels can be used when the TABP p instruction is executed) CMOS silicon gate 20-pin plastic molded LSSOP (PLSP0020JB-A (20P2F-A)) –40 to 85 °C 1.8 V to 3.6 V 400 µA (VDD = 3 V, STCK=f(XIN)/8, f(XIN) = 4 MHz) 0.1 µA (Ta = 25 °C, VDD = 3 V) Parameter Number of basic instructions Minimum instruction execution time Memory sizes Input/Output ports Timer Subroutine nesting Device structure Package Operating temperature range Supply voltage Power dissipation (typical value) ROM RAM D0–D7 E0–E2 G0–G3 CARR Timer 1 Timer 2 Active mode RAM back-up mode I/O I/O I/O Output PIN DESCRIPTION Name Power supply Ground System clock input System clock output I/O port D I/O port E I/O port G Carrier wave output for remote control Input/Output — — Input Output I/O Output Input I/O Output Function Connected to a plus power supply. Connected to a 0 V power supply. I/O pins of the system clock generating circuit. Connect a ceramic resonator between pins XIN and XOUT. The feedback resistor is built-in between pins XIN and XOUT. 1-bit I/O port. For input use, set the latch of the specified bit to “0.” When the built- in pull-down transistor is turned on, the key-on wakeup function using “H” level sense and the pull-down transistor become valid. The output structure is P-channel open-drain. 2-bit (E0, E1) output port. The output structure is P-channel open-drain. 3-bit input port. For input use (E0, E1), set the latch of the specified bit to “0.” When the built-in pull-down transistor is turned on, the key-on wakeup function using “H” level sense and the pull-down transistor become valid. Port E2 has an input-only port and has a key-on wakeup function using “H” level sense and pull- down transistor. 4-bit I/O port. For input use, set the latch of the specified bit to “0.” The output structure is P-channel open-drain. When the built-in pull-down transistor is turned on, the key- on wakeup function using “H” level sense and pull-down transistor become valid. Carrier wave output pin for remote control. The output structure is CMOS circuit. Pin VDD VSS XIN XOUT D0–D7 E0–E2 G0–G3 CARR |
Similar Part No. - M34286 |
|
Similar Description - M34286 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |