Type 167/184 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion
Specifications
The Type 167/184 series radial lead metallized polyester
box capacitors are available in bulk (Type 167) or on
ammo pack or radial tape and reel (Type 184). These
capacitors are constructed in rugged rectangular plas-
tic cases and all come with 7.5 mm (0.3”) lead spacing.
They are good for general purpose applications such as
bypass, decoupling, energy storage/discharge and arc
suppression.
Highlights
•
Rugged plastic case
•
Case and epoxy fill meets UL94V0
•
7.5 mm (0.3”) lead spacing
•
Bulk, tape and reel or ammo pack
•
Non-inductively wound
•
Non-polar
RoHS Compliant
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
Total Self Inductance (L):
Maximum Pulse Rise Time (dv/dt):
0.001 µF to 1.0 µF
63 Vdc to 630 Vdc (40 Vac to 250 Vac, 60 Hz)
±5%, ±10%, ±20%
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
tanδ x 10–4 at 25 ºC ±5 ºC
kHz
tanδ x 10–4
1
≤100
10
≤150
Approximately 8 nH
Vn
V/µs
63
12
100
20
250
32
400
41
630
70
If the working voltage (V) is less than the nominal voltage
(Vn), the capacitor can work at higher dv/dt. In this case, the
maximum value allowed is obtained by multiplying the above
value with the ratio Vn/V.
Long Term Stability (after two years)
Storage
Standard Environmental Conditions
Performance
Capacitance Change ∆C/C ≤ ±3%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com