V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005

www.v-infinity.com

1-866-372-1258

•

CH1

CH2

CH3

CH4

DC output voltage

5V

3.3V

24V

-12V

Output V. tolerance

±3%

±3%

±6%

±5%

Output rated current

8A

8A

1.3A0

0.6A

Output current range

2-10A

0-10A

0.3-2A

0-1A

Ripple & noise p-p

100mV

100mV

150mV

150mV

Line regulation

±1%

±1%

±2%

±1%

Load regulation

±2%

±2%

±6%

±2%

Max. output power

100.6W

Efficiency

75%

DC voltage adj.

CH1,2: +10, -5%

Input voltage range

90~264VAC 47~63Hz; 120-370VDC

AC current

1.5A/115V 0.75A/230V

Inrush current

cold start<= 40A/230V

Leakage current

<3.5mA/240VAC

Overload protection

105%~150%, pulsing (hiccup mode), auto restart.

Over voltage protection

CH1:5.75~6.75V CH2:3.8~4.4V type: shutdown reset: re-power on

Over temp. protection

95°C±5°C TSW1 type: shutdown

reset: auto recovery

Temperature coefficient

±0.3%/ °C(0~50°C)

Set up, rise, hold up time

800ms, 50ms, 16ms / 115, 230VAC

Power factor

PF>0.95/230VAC, PF>0.98/115VAC

Vibration

10~500Hz, 2G 10 min./1 cycle, period fo 60 min. each axes

Withstand voltage

I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC for 1 min.

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity

-10°C~+60°C (refer to output derating curve), 20%-90% RH

Storage temp., humidity

-20°C~+85°C, 10%-95% RH

Dimensions

7.83x3.9x1.97 inches (199x99x50mm)

case: 916A

Weight

1.61lbs (730gs)

Safety standards

UL1950, TUV EN60950 approved

EMC standards

EN55022 class B, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-3-2,-3,

EN55024 verification

Notes:

1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5. Load regulation is measured from 20% to 100% rated load, and other outputs at 60% rated load.

6. Each output provides up to maximum current, but total load can not exceed max. output power.

V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise

customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for

customer ’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s

published specifications. Nothing will be covered outside of standard product warranty.

Features

·Universal AC input / Full range

·Built-in active PFC function, PF>0.95

·Protections:Short circuit/Over load/Over voltage

·Free air cooling convection

·CH4: Polarity is selectable

·Fixed switching frequency at 100KHz(Optional)

·3 year warranty