MPVZ4006G

Sensors

2

Freescale Semiconductor

Figure 1. Fully Integrated Pressure Sensor Schematic

1. Exposure beyond the specified limits may cause permanent damage or degradation to the device.

Parametric

Symbol

Value

Units

Maximum Pressure (P1

> P2)

75

kPa

Storage Temperature

-30

° to +100°°C

Operating Temperature

+10

° to +60°°C

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range

0—

6.0

612

kPa

1. Device is ratiometric within this specified excitation range.

4.75

5.0

5.25

Vdc

Supply Current

—

—

10

mAdc

minimum rated pressure.

4.374

4.6

4.826

V

0.152

0.265

0.378

V

Sensitivity

V/P

—

766

7.511

—mV/kPa

(10 to 60°C)

4. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to

and from the minimum or maximum operating temperature points, with zero differential pressure applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum

or maximum rated pressure, at 25

°C.

• Offset Stability:

Output deviation, after 1000 temperature cycles, -30 to 100

°C, and 1.5 million pressure cycles, with

minimum rated pressure applied.

• TcSpan:

Output deviation over the temperature range of 10

° to 60°C, relative to 25°C.

• TcOffset:

Output deviation with minimum pressure applied, over the temperature range of 10

° to 60°C, relative to 25°C.

5. Auto Zero at Factory Installation: Due to the sensitivity of the MPVZ4006G, external mechanical stresses and mounting position can affect

the zero pressure output reading. To obtain the 2.46% FSS accuracy, the device output must be “autozeroed'' after installation. Autozeroing

is defined as storing the zero pressure output reading and subtracting this from the device's output during normal operations. The specified

accuracy assumes a maximum temperature change of ±5

°C between autozero and measurement.

—

—

—

—

—

—

±2.46

±5.0

auto zero

auto zero

Sensing

Element

GND

Pins 1, 5, 6, 7, and 8 are NO CONNECTS

Thin Film

Temperature

Compensation

and

Gain Stage #1

Gain Stage #2

and

Ground

Reference

Shift Circuitry

for small outline package device